Uniden 416 manual Class Of Service COS Code Restriction, Operation To Enter COS code

Page 34

DIAL RESTRICTION

Class Of Service (COS) Code Restriction

This feature allows you to enter or remove the first four digits of restricted telephone numbers using COS codes. You can have three codes, and they need to be registered at each extension to function. The first 4 digits entered will block outgoing calls.

Operation:

To ENTER COS code :

S 1

( 1 3

(

Telephone No. # N

1.Set the MODE Switch on the right side of the unit to Set-Up Mode

2.Lift the handset connected to Ext. 200 - the dial tone is heard in the receiver.

3.Press 1 to enter the feature.

	4. Press (				( to enter the code number. (max. 3 codes)
		1		3

5.Press Telephone No. (max. 4 digits, eg: 1626 or 0118, etc.)

6.Press # to set.

7.Replace the handset.

S.

8.Set the MODE Switch on the right side of the unit to Business-Hour Mode N

To REMOVE COS code:

S 1 ( 1 3

(

N

1.Set the MODE Switch on the right side of the unit to Set-Up ModeS.

2.Lift the handset connected to Ext. 200 - the dial tone is heard in the receiver.

3.Press 1 to enter the feature.

	4. Press (				( to enter the code number.
		1		3

5. Press to remove.

6.Replace the handset.

7.Set the MODE Switch on the right side of the unit to Business-Hour Mode

N

29

Image 34

Contents USER’S Page Contents Versatile Exchanger Settings Uniden UPBX416 Communication Centre Precautions Important Safety InstructionsIntroduction FeaturesUniden’s UPBX416 is ideal for small or home office use USER’S Included in your UPBX416 PackageSteps for Setting Up InstallationLines for no telephone call? Connecting Telephone Lines to Extensions Connecting Telephone LinesConnecting Power Mode N What is the Central Office C.O.?O. Lines used for telephone calls. default setting System ProgrammingWhen disabled To Check Time and Week Recording System OGMs Auto Attendant OGM 3 When there is No AnswerOGM 7 When Connecting to the Operator System OGMsPress Recording System OGMs Out Going MessagesOperation S To select OGM numberChecking System OGMs Out Going Messages Setting Number of RingsPress 6 0 to enter the feature Operation S 6 0 0Music-On-Hold Password RegistrationManaging OWN Voice Mail BOX Recording Station OGMChecking Station OGM PressManaging ICMs from a Local Telephone Press 2 to play ICM Managing ICMs From a Remote Telephone Remote ControlOperation Press Telephone No. and #Receiving messages When Leaving Your DeskCall NotificationCall Paging No. # Outside Call Basic Telephony OperationsIntercom Call Method 1 Obtaining an idle line for your outgoing callLeaving a message by extension Call Pick-UpLeaving a message after a call pick-up Operation FlashExtension / C.O. Line Callback Conference Call / 3-Way CallingOperation 6 Call Screen Last Number RedialCall Hold Caller will be placed on MOHTo be called Call ForwardingCall Forwarding to Extension Number Call Forwarding OutsidePage Extension Memory Dial Input/Out Memory DialSystem Memory Dial Input/Out To Dial OUT Method 2 by using telephone Setting the Off-Hour modeMethod 1 by Mode Switch OGM 6 in the Off-HourOperation To SET Setting the Business-Hour mode Default settingUrgent Call To SET S 6 7 #Press 6 3 to enter the Attendant mode Auto-Attendant ModeAttendant Mode Operation S 6 3 # NMulti-Attendant Mode Sub-Attendant ModeAssigning Attendant Telephone Operation To Enter COS code Class Of Service COS Code RestrictionPress to remove Replace the handset Press # to set Replace the handset Station Class Of Service COS Code RestrictionTo remove Press 0 Station Maximum Digit RestrictionTo Free station max. digit restriction