ATT Appears when the Attenuator function is set.
Indicates the keypad is locked.
Appears when the display mode is
Alpha Name mode.
CTCSS Appears when the Subaudible Tone function is turned on and a CTCSS tone is associated on the display channel.
CDCSS Appears when the Subaudible Tone function is turned on and a CDCSS tone is associated on the display channel.
2.Press 
to start scanning all programmed channels that are not locked out. (SCAN moves across the display during scanning.)
3.In SCAN and WX or SEARCH Mode, press 
to stop scanning. (HOLD appears on the display.)
In Manual mode, press 
to step up the channel.
4.NUMERIC KEYPAD — Use these keys to program a
channel for scanning. Also use to access a channel
directly with 
. During SCAN Mode, use these keys to select or deselect any of the 10 memory banks. (Only the selected bank indicator(s) appear on the display.)
Note: You cannot deactivate all 10 banks at the same time.
Key Bank Channel
1 | 1 - 20 |
2 21 - 40
3 41 - 60
4 61 - 80
5 81 - 100
6 101 - 120
7 121 - 140
8 141 - 160
9 161 - 180
10 181 - 200
12