Uniden SC200 manual Deleting a Stored Frequency, Programming with Search

Page 22

6.If that frequency is already stored in another channel, you will hear a “beep”, and the other channel number will

appear on the display. If you want to store the frequency

in the selected channel (18) as well, press again. The frequency will blink twice to confirm the programming.

Or, you can press and enter another frequency for the currently selected channel.

Note: Any frequency already stored in any channel will automatically be replaced by the new one.

7.If you try to enter a frequency that is outside one of the 12 Bands, you will hear a “beep”, and the wordError“ ” appears on the display.

Press and re-enter the correct frequency.

8.To program another channel, repeat the above procedures.

Deleting a Stored Frequency

To delete a frequency from a channel:

1.Display the channel and frequency that is to be deleted.

2.Press on the numeric keypad.

3.Press . The current channel is erased, and the display shows 000.0000.

Note: That channel will be skipped during scanning.

B. Programming with Search

The Search feature enables you to rapidly search for active frequencies within the specified band limits. When an interesting frequency is found, you can store it into a channel using the procedure below. For more information about SEARCH Mode, see the section titled “Searching”.

1.Press and hold /BAND to enter the BAND SEARCH Mode.

20

Image 22

Contents SC200 Precautions Do not short circuit the batteryContents CTCSS/CDCSS Tone Frequencies Hz What is Searching? What is Scanning?About Your New SportCat What is Ctcss and CDCSS? Types of Communication Range Step Band SubjectWhere to Obtain More Information UnpackingFeature Highlights Page Controls and Indicators Top ViewFront View Indicates Weather Scan Mode Page Bands. Then press /BAND again to start band search Page Setup Installing the Battery PackUsing the Earphone Installing the Belt ClipMounting the Flexible Antenna Readjust the volume to a comfortable listening level Operation OverviewPage Programming Channels Programming By Manual EntryProgramming with Search Deleting a Stored FrequencyAppear on the display. If you want to store the frequency Programming Channels with Alpha Characters Alert Beep Setting Scanning Bank ScanningDelay Priority ScanLocking Out Channels Looking for Locked Out ChannelsWeather Channel Scanning BandLimit Search SearchingBand Search Press Enter the lower limit of your search rangeVFO Search Search Skip FrequencyCTCSS/CDCSS Operation Programming a Ctcss Tone/CDCSS ToneSearching for Ctcss Tones/CDCSS Tones Using Tone Search Change per 1sec Using Ctcss Tone or Cdcss Tone Search While Searching Ctcss and DCS begins flashing in display Changing a CTCSS/CDCSS Tone Erasing a CTCSS/CDCSS Tone Press to change the Ctcss tonePage Connecting the Scanner Remote InterfaceScanner to External Modem SmartScan ModeScanner to Scanner Page Page Program Lock Flow control setting Xon/Xoff, RTS/CTS, Off Dial typeMenu for SmartScan Whenever you press Transfer speedFlow Control Transfer SpeedPress . The phone number appears Press to place the call Dial Type Smartscanner TipsClone Mode Press . Clone ModeOn the scanner that is the Slave Unit, press Key until Care and Maintenance Replacing the Battery PackLocation CleaningRepairs Birdies Proper Care of Your ScannerTechnical Specifications Size 2-1/2 W x 1-3/4 D x 11-3/4 H With antenna attached CTCSS/CDCSS Tone Frequencies Hz CtcssOptional Accessories Replacement Parts Troubleshooting Problem SolutionProblem Solution One Year Limited Warranty Page Covered Under ONE or More of the Following U.S. Patents