Uniden SC200 manual Care and Maintenance, Replacing the Battery Pack

Page 49

Care and Maintenance

Replacing the Battery Pack

1. Turn the On-Off/Volume Control OFF.

2. Turn the scanner over so you are looking at the back. If the belt clip is attached, remove it by taking out the two screws.

3. Press in on the ribbed area and slide the battery cover down and off.

4.Carefully unplug the battery pack and lift it out of the case. You may need to exert slight pressure toward the top of the scanner as you slide the battery pack out of the case.

5.Carefully plug in the new battery pack, observing the proper polarity. (The RED wire should be on the upper side as you plug it in.) Although the plug is keyed to reduce the chance of inserting it in wrong, make sure the wires are in the correct position before pushing it in all the way. DO NOT FORCE THE PLUG.

47

Image 49

Contents SC200 Do not short circuit the battery PrecautionsContents CTCSS/CDCSS Tone Frequencies Hz What is Searching? What is Scanning?About Your New SportCat What is Ctcss and CDCSS? Range Step Band Subject Types of CommunicationUnpacking Where to Obtain More InformationFeature Highlights Page Top View Controls and IndicatorsFront View Indicates Weather Scan Mode Page Bands. Then press /BAND again to start band search Page Installing the Battery Pack SetupUsing the Earphone Installing the Belt ClipMounting the Flexible Antenna Operation Overview Readjust the volume to a comfortable listening levelPage Programming By Manual Entry Programming ChannelsProgramming with Search Deleting a Stored FrequencyAppear on the display. If you want to store the frequency Programming Channels with Alpha Characters Alert Beep Setting Bank Scanning ScanningPriority Scan DelayLooking for Locked Out Channels Locking Out ChannelsBand Weather Channel ScanningBand Search SearchingLimit Search Press Enter the lower limit of your search rangeSearch Skip Frequency VFO SearchProgramming a Ctcss Tone/CDCSS Tone CTCSS/CDCSS OperationSearching for Ctcss Tones/CDCSS Tones Using Tone Search Change per 1sec Using Ctcss Tone or Cdcss Tone Search While Searching Ctcss and DCS begins flashing in display Changing a CTCSS/CDCSS Tone Press to change the Ctcss tone Erasing a CTCSS/CDCSS TonePage Remote Interface Connecting the ScannerScanner to External Modem SmartScan ModeScanner to Scanner Page Page Menu for SmartScan Flow control setting Xon/Xoff, RTS/CTS, Off Dial typeProgram Lock Whenever you press Transfer speedFlow Control Transfer SpeedPress . The phone number appears Press to place the call Smartscanner Tips Dial TypePress . Clone Mode Clone ModeOn the scanner that is the Slave Unit, press Key until Replacing the Battery Pack Care and MaintenanceLocation CleaningRepairs Proper Care of Your Scanner BirdiesTechnical Specifications Size 2-1/2 W x 1-3/4 D x 11-3/4 H With antenna attached Ctcss CTCSS/CDCSS Tone Frequencies HzOptional Accessories Replacement Parts Problem Solution TroubleshootingProblem Solution One Year Limited Warranty Page Covered Under ONE or More of the Following U.S. Patents