Mounting the Flexible Antenna
Place the end of the antenna onto the BNC connector on top of the scanner and turn clockwise until tight.
Installing the Belt Clip
1. Place the Belt Clip on the mounting area on the back of the scanner, making sure the holes in the clip line up with the threads in the back of the scanner.
2.Insert the 2 screws into the corresponding holes and tighten.
CAUTION: Do not tighten the screws too tight. You could damage the case or clip.
Using the Earphone
The PHONE jack at the top of the SportCat is a standard 3.5mm stereo phone jack. You can use either the supplied earphone, or a stereo headset of the proper impedance
(32 ). The output of this jack is monaural audio, but you will hear it in both headphones of a stereo headset.
IMPORTANT!
Be sure to use only the supplied earphone, or stereo headset of the proper impedance (32 ). Use of an incorrect earphone or stereo headset may be potentially hazardous to your hearing.
WARNING: To avoid discomfort or possible hearing damage, be sure to set the Volume Control before plugging in the earphone or proper headphones. A sudden opening of the Squelch may cause unexpected loud audio.
16