5.Select the character using VFO Control. Turn clockwise to move 0 - 9, A - z and other characters and stop the control at the letter you wish to store.
6.Repeat the steps 4 and 5 for all the characters you want to program.
7.When you complete the input, press
. The words you have programmed flash twice.
Alert Beep Setting
When a transmission occurs on a channel on which you have set the Alert Beep function, 2 beeps will let you know that your “favorite” channel has been received.
You can set this function for each channel. Select a
channel, then press and hold 
/ALERT to set this function on a channel in Manual mode.
appears on the display. (Except in Alpha Name display Mode)
You cannot set this function for the channels which have not been programmed before.
22