If you want to program tones for several frequencies during your search, follow these steps:
After you program a frequency and a CTCSS tone or CDCSS tone into a channel, the Search
Mode is changed to Search Hold Mode. To
activate the Search Mode press 
/BAND.
If you decide to cancel the CTCSS Tone Search Mode or CDCSS Tone Search Mode while you
are searching for frequencies, press and hold
until you hear two short beeps and the CTCSS indicator or DCS indicator turns off.
Changing a CTCSS/CDCSS Tone
1.Press 
to activate the Subaudible Tone function.
2.Select the channel you want to change.
Change per 1sec.
3.Press 
.
4.Enter the new CTCSS tone or CDCSS tone using VFO
control, 
or 
.
If you make a mistake while using your keypad, press 
and enter the tone again.
35