6. Insert the battery pack by placing the bottom in the case first. Make sure it is seated within the case before replacing the battery cover.
7.Replace the battery cover by putting the
two tabs in the corresponding opening and sliding it upward until it locks in place.
Location
If strong interference or electrical noise is received, relocate the scanner or its antenna away from the source of the noise. A higher elevation, if possible, may provide better reception.
Do not use the scanner in
Avoid placing the unit in direct sunlight or near heating elements or vents.
Do not plug the scanner into an outlet controlled by a wall switch as prolonged periods without power will cause scanner memory loss.
Cleaning
Disconnect the power to the unit before cleaning.
Clean the outside of the scanner with a mild detergent.
To prevent scratches, do not use abrasive cleaners or solvents. Be careful not to rub the LCD window.
Do not use excessive amounts of water.
Repairs
Do not attempt any repair. The scanner contains no serviceable parts. Contact the Uniden Customer Service Center or take it to a qualified repair technician.
48