Uniden SC200 manual Scanner to External Modem, Scanner to Scanner, SmartScan Mode

Page 41

Scanner to External Modem

Plug the scanner end of the supplied remote interface cable into the remote port on the right side of your scanner. When connecting the cable to your scanner, make sure the label side of the cable is facing forward. Plug the other end of the cable (DB-9 serial connector) into the external modem. You may need a DB-9 to DB-25 null modem adapter, available at most computer stores. Of course, make sure your external modem is turned on. Make sure that you have a phone line plugged into the modem jack on the back.

Scanner to Scanner

Plug the scanner end of the supplied remote interface cables into the remote ports on the right sides of each of the two scanners. When connecting the cable to your scanner, make sure the label side of the cable is facing forward.

SmartScan Mode

You can automatically download frequencies, from the Uniden National Frequency Database server. After connecting the scanner to a modem using the Scanner to PC or Scanner to External Modem steps (see page 38), turn the radio off. Press and hold REM key and turn the radio on.

1.The following screen appears. (SmartScan Mode) To

select SmartScan mode, press or .

39

Image 41

Contents SC200 Do not short circuit the battery PrecautionsContents CTCSS/CDCSS Tone Frequencies Hz About Your New SportCat What is Scanning?What is Searching? What is Ctcss and CDCSS? Range Step Band Subject Types of CommunicationUnpacking Where to Obtain More InformationFeature Highlights Page Top View Controls and IndicatorsFront View Indicates Weather Scan Mode Page Bands. Then press /BAND again to start band search Page Installing the Battery Pack SetupMounting the Flexible Antenna Installing the Belt ClipUsing the Earphone Operation Overview Readjust the volume to a comfortable listening levelPage Programming By Manual Entry Programming ChannelsAppear on the display. If you want to store the frequency Deleting a Stored FrequencyProgramming with Search Programming Channels with Alpha Characters Alert Beep Setting Bank Scanning ScanningPriority Scan DelayLooking for Locked Out Channels Locking Out ChannelsBand Weather Channel ScanningBand Search SearchingLimit Search Press Enter the lower limit of your search rangeSearch Skip Frequency VFO SearchProgramming a Ctcss Tone/CDCSS Tone CTCSS/CDCSS OperationSearching for Ctcss Tones/CDCSS Tones Using Tone Search Change per 1sec Using Ctcss Tone or Cdcss Tone Search While Searching Ctcss and DCS begins flashing in display Changing a CTCSS/CDCSS Tone Press to change the Ctcss tone Erasing a CTCSS/CDCSS TonePage Remote Interface Connecting the ScannerScanner to Scanner SmartScan ModeScanner to External Modem Page Page Menu for SmartScan Flow control setting Xon/Xoff, RTS/CTS, Off Dial typeProgram Lock Whenever you press Transfer speedPress . The phone number appears Press to place the call Transfer SpeedFlow Control Smartscanner Tips Dial TypePress . Clone Mode Clone ModeOn the scanner that is the Slave Unit, press Key until Replacing the Battery Pack Care and MaintenanceRepairs CleaningLocation Proper Care of Your Scanner BirdiesTechnical Specifications Size 2-1/2 W x 1-3/4 D x 11-3/4 H With antenna attached Ctcss CTCSS/CDCSS Tone Frequencies HzOptional Accessories Replacement Parts Problem Solution TroubleshootingProblem Solution One Year Limited Warranty Page Covered Under ONE or More of the Following U.S. Patents