Panasonic DP-MB350 manual Making a copy

Page 36

5. Copier

5.1 Making a copy

5.1.1 Using the scanner glass

{Copy}

{Set}{V}{^}{<}{>} {Start}

{Fax Auto Answer} {Stop}

1If the {Copy} light is OFF, turn it ON by pressing

{Copy}.

2Set the original (page 19).

3If necessary, change the copy settings according to the type of document.

L To change the number of copies, see page 36. L To select the contrast, see page 36.

L To select the resolution, see page 36. L To select the zoom rate, see page 36.

4{Start}

LIf the copy input tray prompt (feature #471 on page 68) is activated, select the desired

recording paper size by pressing {<} or {>} repeatedly, then press {Start} again.

LThe unit will start copying.

5After you finish copying, press {Stop} to reset the settings you set in step 3.

Note:

LTo stop copying, see page 78.

LYou can change the default operation mode (feature #463 on page 60) and the timer before returning to the default operation mode (feature #464 on page

60).

LIf the {Fax Auto Answer} light is ON, the unit can receive faxes automatically even when in the copy mode.

To change the number of copies

1.Press {V} or {^} repeatedly to select “Copies”.

2.Enter the number of copies (up to 99).

3. {Set}

To select the contrast

Adjust this setting depending on the darkness or lightness of the document. 5 levels (low to high) are available.

1.Press {V} or {^} repeatedly to select “Contrast”.

2.Press {<} or {>}. i{Set}

Note:

LYou can hold the previous contrast setting (feature #462 on page 60).

To select the resolution

1.Press {V} or {^} repeatedly to select “Resolution”.

2.Press {<} or {>} repeatedly to select the desired resolution.

–“Text/Photo”: For both text and photographs.

–“Text”: For text only.

–“Photo”: For photographs, shaded drawings, etc.

3.{Set}

Note:

LYou can change the default resolution (feature #461 on page 67).

To select zoom rate (enlargement / reduction)

1.Press {V} or {^} repeatedly to select “Zoom”.

2.Press {<} or {>} repeatedly to select the zoom rate that fits the size of your document and recording paper.

–“100%”

–“50%”

–“200%”

LYou can enter the desired percentage from

“25%” to “400%” specifically by using the dial

keys.

LAdditional zoom rates can be selected according to the recording paper size setting (feature #380 on page 59 or feature #382 on page 59).

Feature #380/#382 setting

Additional zoom rate

“Letter”

“A4→Letter”

 

“Legal→Letter”

“A4”

“Letter→A4”

 

“Legal→A4”

“Legal”

–

3. {Set}

 

Note:

 

LZoom copy is not available for the following features:

–Quick ID copy feature (page 39)

–Easy repeat feature (page 39)

–Poster feature (page 40)

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Operating Instructions Environment TrademarksProperty of their respective owners CopyrightFor your safety For best performanceMoving the unit Illegal copiesRoutine care It is unlawful to make copies of certain documentsTelephone line Single telephone line101 102103 106Supplied accessories Accessory informationToner cartridge Drum cartridge Quick reference guideButton descriptions Display descriptions Display and buttonsPower inlet OverviewFront view Rear viewToner cartridge and drum cartridge Supplied toner cartridge is a starter toner cartridgeWhen to replace the toner cartridge and the drum cartridge Toner save feature Waste disposal methodRecording paper Moist paper Inkjet paperIntroduction and Installation Approx .8 kg 10.6 lb Using surge protectors Using network router/network hubWe recommend using network routers/network hubs ConnectionsTurning the power switch on Dialing modeTurn the power switch to the on position Press Menu to exitSelecting the operation mode Scan/Copy/Fax Setting the originalUsing the scanner glass Effective scanning areaUsing the automatic document feeder Document weightMinimum document size Maximum document sizeAdjusting the volume Date and timeYou can turn this feature OFF feature #226 on Your logoConfiguring the unit to access the LAN Setting up automatically with a Dhcp serverSetting up manually Your fax numberInstalling Multi-Function Station Setting the computer for PC fax receptionRequired computer environment Installing Multi-Function Station on a computer Starting Multi-Function Station To change the settings To select the default Email softwareOCR Path To select the OCR software Appears, click ContinuePrinting from Windows applications Duplex printingUtilities iConfiguration Web Page i Network Configuration Printing on special mediaTo print on transparencies To print on labelsPrinter Scanning from the unit Push Scan Scan to ViewerScan to save as a file Scan to EmailScan to OCR Scan to email address LAN connection onlyUsing navigator key Using dial keypadScanning 2-sided originals automatic document feeder only Example LisaUsing Multi-Function scan application Using ViewerScanning from a computer Pull Scan Utilities iViewer Multi-Function Viewer will appearUsing other applications For Twain scanningSelect Acquire Image... from the File menu For WIA scanning Select From Scanner or Camera... fromMaking a copy When using the scanner glass, the unit will only Using the automatic document feederExample 70 % reduced copy Using the scanner glass Original documentMore copying features Duplex featureCollate copy When using the scanner glass Start Quick ID copy featureEasy repeat feature For detailsPoster feature Scanner glass only 1 featureQuick ID copy feature Start Easy repeat feature StartBooklet feature Copy reservationStart to start copying Reserving the fax transmission Dual Access When using the automatic document feeder, press StartSending a fax manually To redial the last number RedialSending from memory Quick scan feature Printing a journal reportPre-dialing a fax number To send 2-sided originalsStoring items for the navigator directory Storing navigator directory itemsEditing a stored item Erasing a stored itemSending a fax using navigator directory Broadcast transmissionProgramming items into the broadcast memory Adding a new item into the broadcast memoryTo send the same document using the scanner glass Erasing a stored item from the broadcast memorySending the same document to pre- programmed parties To add other items, repeat this step up to 20 itemsActivating FAX only mode If you have subscribed to a Distinctive Ring serviceReceiving a fax automatically Auto answer on SendActivating TEL mode Receiving a fax manually Auto answer OFFDisplaying a received fax document Viewing a fax documentPrinting a fax document Saving a fax documentErasing a fax document Using the unit with an answering machine Setting up the unit and an answering machineConnect the answering machine Receiving a voice message and fax document in one callActivating the junk fax prohibitor Storing undesired callersActivating the fax preview mode Programming the web fax preview access codeReceiving a fax on your computer Web fax preview LAN connection onlyWhat , means Caller ID service Symbols and operations for caller informationHow Caller ID is displayed Erasing caller information Erasing all caller informationErasing specific caller information Menu SetDistinctive Ring service Using two or more phone numbers on a single telephone lineActivating the Distinctive Ring feature Programming the ring pattern assigned for faxConfiguration Web ProgrammingSubmit Basic features 700ms defaultNo default Activating this featureTo reset all features Counter view feature #484 on page 61 will not be resetPaper type setting feature #383 on Setting feature #383 onSetting the default operation To select #1+#2Programmable Features Fax features This feature is not available for broadcast transmissionRe-send the document Calling charges may be higher than usual#412 Desired time Off default To send a document Then press SetTo beep when the memory is nearly full Type setting feature #383 onData after recognition of the computer connection Connection, it will print the dataFeature/Code Selection Setting the information for Copy features Overrides this featureTo change the setting again Paper. Change the setting to Plain Paper or Thin Paper Desired paper input trayRepeatedly, then press Start BeforehandPC print features That 80 characters in 10 cpi font may be printed on a lineFeature/Code Selection Setting the font number To each fontScan features Address destinations via anProgrammable Features LAN features Select the LAN Feature tab Change the mode and edit IP filtering information. iSubmitInterface Click Edit next to Approved UsersNetwork features LAN connection only Feature Tab Selection Setting the LAN LAN FeatureFeatures Setting the community Enter the Snmp community name. Consult yourEnter the desired email checking interval for the scan to Using Remote Control To select characters using V orCharacter entry Status of the unitCanceling the operations Using Device MonitorUsing the web browser LAN connection only Lower input tray optional Setting the lower input tray Click Auto Configuration on the Device tab. iOKFor Windows 98/Windows Me/Windows 2000/Windows XP For Number of Input Tray, 2 will be selectedReport messages Display Cause & Solution Display messagesSettings 104Check the connection between the computer and the unit Check that the computer is turned onSided document / 360 mm 143/ of 2-sided document using Transmission error occurred. Try againDocument is jammed. Remove the jammed document Document into two or more sheets and try againWhen a function does not work GeneralPrinting problems Scanner Copier 11.3.5 FaxProblem Cause & Solution Cannot receive documents Connecting, but faxes areReceiving mode AutomaticallyProblem Cause & Solution When an extension telephone Receiving mode does notIs connected, I cannot receive Documents by pressingNetwork Using an answering machine If a power failure occursChange settings Easy installation Modify iNextWindows Firewall ContinueWhen the recording paper has jammed inside of the unit Recording paper jamDisplay will show the following Case When the recording paper has jammed near the rollers When the recording paper has jammed inside the fuser unitRemove the jammed paper 4 carefully by pulling it upward Remove the jammed paper 5 carefully by pulling it upwardWhen the recording paper has jammed over the fuser unit Push up the green levers m to the original position Remove the jammed paper n carefully by pulling it upwardPaper Jammed Open Tray #2 Left Cover Paper Jammed b When the recording paper is not fed into the unit properly Close the cover at the left side of the lower input trayWhen the document has jammed near the document entrance When the document has jammed near the document exitDocument jams Automatic document feeder Open the ADF cover 1 while holding the document coverCleaning the white plates and glass Cleaning the document feeder rollers Clean the rollers when documents frequently misfeedSpecifications Reference lists and reportsPrinting resolution ITU-T No.1 Test ChartRecording paper specifications Plain paper/Thin paper size Recording paper weightApprox ,600 pages can be printed Drum lifeInformation of copyrights and licenses 107 108 109 110 111 112 113 114 115 Index 117 118 119 PNQX2279ZA CM0709TM0 CD
Top Page Image Contents