Panasonic DP-MB350 104, Check the connection between the computer and the unit, Documents, Again

	11. Help
Display	Cause & Solution
“Fax in Memory”	L The unit has a document in memory. See the other displayed message
	instructions to print out the document. For fax memory capacity, see page
	104.
	L If the PC fax setting (feature #442 on page 65) is set to “Always”,
	– check the connection between the computer and the unit.
	– check that the computer is turned ON.
	L If the fax preview mode (feature #448 on page 52) is set to “On”,
	– view, print or save the received fax documents (page 48, 49, 52), and
	then erase the unnecessary documents (page 49).
	– turn the setting to “Off”. The fax documents stored in memory will be
	printed automatically.
	– set feature #449 (page 65) to “On”, and then print the received fax
	documents (page 49).
“File Size Over”	L When performing scan to FTP server, the total file size of scanned data
	exceeded the file size limitation. Divide the document into sections.
“Keep Copying”	L Copying has stopped due to some existing problem (Example: a lack of
	recording paper or a recording paper jam). See the other displayed
	message instructions to continue copying.
“Left Cover Open”	L The left cover is open. Close it.
“Low Temperature”	L The inside of the unit is extremely cold and cannot be operated. Use the unit
	in a warmer area.
“Memory Full”	L When performing memory transmission, the document being stored
	exceeded the memory capacity of the unit. Send the entire document
	manually.
	L When making a copy, the document being stored exceeded the memory
	capacity of the unit. Press {Stop} to clear the message. Divide the
	document into sections.
“Memory Overflow”	L When printing a file, the document being stored exceeded the memory
	capacity of the unit. Press {Stop} to clear the message. Change the printer
	settings (page 28).
“Modem Error”	L There is something wrong with the unit’s modem. Contact our service
	personnel.
“No Fax Reply”	L The other party’s fax machine is busy or has run out of recording paper. Try
	again.
“Out of Paper Input Tray	L Recording paper is not loaded or the paper input tray has run out of paper.
#1”	Load paper (page 14).
	L Recording paper was not fed into the unit properly. Load the paper again
	(page 14).
	Note:
	L “#1”: Standard input tray
	L “#2”: Lower input tray
	L “#1+#2”: Standard input tray and lower input tray
“Paper Jammed”	L A recording paper jam occurred. See the other displayed message
	instructions to remove the jammed paper (page 94).
“PC Fail or Busy.”	L The cable or the computer power cord is not connected correctly. Check the
	connections (page 17, 25).
	L The software is not running on the computer. Restart the software and try
	again.
“Please Wait”	L The unit is warming up. Wait for a while.

For assistance, please contact an authorized Panasonic dealer. 83