Panasonic DP-MB350 manual Display messages, Display Cause & Solution

Page 82

11. Help

11.2 Display messages

To indicate the unit’s status, one or more of the following messages will appear on the display.

Display

Cause & Solution

Call Service

L There is something wrong with the unit. Contact our service personnel.

Change Drum

L There is something wrong with the drum cartridge. Replace the drum

 

cartridge.

Change Supplies Toner

L The toner is empty. Replace the toner cartridge immediately.

Empty

 

Change Supplies Toner

L The toner is reaching the end of its life. You will need to replace the toner

Low

cartridge soon.

Check Document

L The document was not fed into the unit properly. Remove the document,

 

and then press {Stop} to clear the message. Re-insert the document. If

 

misfeeding occurs frequently, clean the document feeder rollers (page 102)

 

and try again.

 

 

Check Drum

L The drum cartridge is not inserted properly. Re-insert it correctly (page 11).

Check Install Input

L The paper input tray is not installed correctly. Pull out the paper input tray

Tray #1

and re-insert it.

 

Note:

 

L #1: Standard input tray

 

L #2: Lower input tray

 

L #1+#2: Standard input tray and lower input tray

Check Paper

L The recording paper size setting and/or the loaded recording paper is not

 

appropriate.

 

– The recording paper size is not the same as the size selected for copy.

 

– The recording paper size is not the same as the size selected when

 

printing from the PC.

 

– The recording paper size is not the same as the size selected for

 

receiving a fax.

 

Change the recording paper size setting (feature #380 on page 59 or

 

feature #382 on page 59), and load the appropriate recording paper.

 

 

Check Pick Up Input

L Recording paper was not fed into the unit properly. Load the paper again

Tray #1

(page 99).

 

Note:

 

L #1: Standard input tray

 

L #2: Lower input tray

Directory Full

L There is no space to store new items in the navigator directory. Erase

 

unnecessary items (page 44).

Drum Life Low

L The drum is reaching the end of its life. Replace the drum cartridge as soon

 

as possible.

Email Size Over

L When performing scan to email address, the total file size of scanned data

 

exceeded the file size limitation. Divide the document into sections.

82

For assistance, please contact an authorized Panasonic dealer.

Image 82
Contents Operating Instructions Property of their respective owners EnvironmentTrademarks CopyrightFor your safety For best performanceRoutine care Moving the unitIllegal copies It is unlawful to make copies of certain documentsTelephone line Single telephone line103 101102 106Toner cartridge Drum cartridge Supplied accessoriesAccessory information Quick reference guideButton descriptions Display descriptions Display and buttonsFront view Power inletOverview Rear viewToner cartridge and drum cartridge Supplied toner cartridge is a starter toner cartridgeWhen to replace the toner cartridge and the drum cartridge Toner save feature Waste disposal methodRecording paper Moist paper Inkjet paperIntroduction and Installation Approx .8 kg 10.6 lb We recommend using network routers/network hubs Using surge protectorsUsing network router/network hub ConnectionsTurn the power switch to the on position Turning the power switch onDialing mode Press Menu to exitUsing the scanner glass Selecting the operation mode Scan/Copy/FaxSetting the original Effective scanning areaMinimum document size Using the automatic document feederDocument weight Maximum document sizeAdjusting the volume Date and timeYou can turn this feature OFF feature #226 on Your logoSetting up manually Configuring the unit to access the LANSetting up automatically with a Dhcp server Your fax numberSetting the computer for PC fax reception Installing Multi-Function StationRequired computer environment Installing Multi-Function Station on a computer Starting Multi-Function Station OCR Path To select the OCR software To change the settingsTo select the default Email software Appears, click ContinuePrinting from Windows applications Duplex printingTo print on transparencies Utilities iConfiguration Web Page i Network ConfigurationPrinting on special media To print on labelsPrinter Scanning from the unit Push Scan Scan to ViewerScan to OCR Scan to save as a fileScan to Email Scan to email address LAN connection onlyScanning 2-sided originals automatic document feeder only Using navigator keyUsing dial keypad Example LisaScanning from a computer Pull Scan Using Multi-Function scan applicationUsing Viewer Utilities iViewer Multi-Function Viewer will appearSelect Acquire Image... from the File menu Using other applicationsFor Twain scanning For WIA scanning Select From Scanner or Camera... fromMaking a copy Example 70 % reduced copy Using the scanner glass When using the scanner glass, the unit will onlyUsing the automatic document feeder Original documentDuplex feature More copying featuresCollate copy Easy repeat feature When using the scanner glass StartQuick ID copy feature For detailsQuick ID copy feature Start Poster feature Scanner glass only1 feature Easy repeat feature StartCopy reservation Booklet featureStart to start copying Sending a fax manually Reserving the fax transmission Dual AccessWhen using the automatic document feeder, press Start To redial the last number RedialPre-dialing a fax number Sending from memory Quick scan featurePrinting a journal report To send 2-sided originalsEditing a stored item Storing items for the navigator directoryStoring navigator directory items Erasing a stored itemProgramming items into the broadcast memory Sending a fax using navigator directoryBroadcast transmission Adding a new item into the broadcast memorySending the same document to pre- programmed parties To send the same document using the scanner glassErasing a stored item from the broadcast memory To add other items, repeat this step up to 20 itemsReceiving a fax automatically Auto answer on Activating FAX only modeIf you have subscribed to a Distinctive Ring service SendDisplaying a received fax document Activating TEL modeReceiving a fax manually Auto answer OFF Viewing a fax documentSaving a fax document Printing a fax documentErasing a fax document Connect the answering machine Using the unit with an answering machineSetting up the unit and an answering machine Receiving a voice message and fax document in one callActivating the junk fax prohibitor Storing undesired callersReceiving a fax on your computer Activating the fax preview modeProgramming the web fax preview access code Web fax preview LAN connection onlyWhat , means Symbols and operations for caller information Caller ID serviceHow Caller ID is displayed Erasing specific caller information Erasing caller informationErasing all caller information Menu SetActivating the Distinctive Ring feature Distinctive Ring serviceUsing two or more phone numbers on a single telephone line Programming the ring pattern assigned for faxProgramming Configuration WebSubmit Basic features 700ms defaultTo reset all features No defaultActivating this feature Counter view feature #484 on page 61 will not be resetSetting the default operation Paper type setting feature #383 onSetting feature #383 on To select #1+#2Programmable Features Re-send the document Fax featuresThis feature is not available for broadcast transmission Calling charges may be higher than usual#412 Desired time Off default To send a document Then press SetTo beep when the memory is nearly full Type setting feature #383 onData after recognition of the computer connection Connection, it will print the dataFeature/Code Selection Setting the information for Overrides this feature Copy featuresTo change the setting again Repeatedly, then press Start Paper. Change the setting to Plain Paper or Thin PaperDesired paper input tray BeforehandPC print features That 80 characters in 10 cpi font may be printed on a lineFeature/Code Selection Setting the font number To each fontScan features Address destinations via anProgrammable Features LAN features Interface Select the LAN Feature tabChange the mode and edit IP filtering information. iSubmit Click Edit next to Approved UsersFeatures Setting the community Network features LAN connection onlyFeature Tab Selection Setting the LAN LAN Feature Enter the Snmp community name. Consult yourEnter the desired email checking interval for the scan to Character entry Using Remote ControlTo select characters using V or Status of the unitUsing Device Monitor Canceling the operationsUsing the web browser LAN connection only Lower input tray optional For Windows 98/Windows Me/Windows 2000/Windows XP Setting the lower input trayClick Auto Configuration on the Device tab. iOK For Number of Input Tray, 2 will be selectedReport messages Display Cause & Solution Display messagesCheck the connection between the computer and the unit Settings104 Check that the computer is turned onDocument is jammed. Remove the jammed document Sided document / 360 mm 143/ of 2-sided document usingTransmission error occurred. Try again Document into two or more sheets and try againWhen a function does not work GeneralPrinting problems Scanner Copier 11.3.5 FaxReceiving mode Problem Cause & Solution Cannot receive documentsConnecting, but faxes are AutomaticallyIs connected, I cannot receive Problem Cause & Solution When an extension telephoneReceiving mode does not Documents by pressingNetwork Using an answering machine If a power failure occursWindows Firewall Change settingsEasy installation Modify iNext ContinueRecording paper jam When the recording paper has jammed inside of the unitDisplay will show the following Remove the jammed paper 4 carefully by pulling it upward Case When the recording paper has jammed near the rollersWhen the recording paper has jammed inside the fuser unit Remove the jammed paper 5 carefully by pulling it upwardWhen the recording paper has jammed over the fuser unit Push up the green levers m to the original position Remove the jammed paper n carefully by pulling it upwardPaper Jammed Open Tray #2 Left Cover Paper Jammed b When the recording paper is not fed into the unit properly Close the cover at the left side of the lower input trayDocument jams Automatic document feeder When the document has jammed near the document entranceWhen the document has jammed near the document exit Open the ADF cover 1 while holding the document coverCleaning the white plates and glass Cleaning the document feeder rollers Clean the rollers when documents frequently misfeedSpecifications Reference lists and reportsRecording paper specifications Plain paper/Thin paper size Printing resolutionITU-T No.1 Test Chart Recording paper weightApprox ,600 pages can be printed Drum lifeInformation of copyrights and licenses 107 108 109 110 111 112 113 114 115 Index 117 118 119 PNQX2279ZA CM0709TM0 CD