Panasonic PT-D7600U Name and function of parts Front and side of the projector

Page 12

Name and function of parts

Front and side of the projector

Side-mounted connection terminals (page 14)

AC IN terminal (page 39)

Connect the supplied line power cord into this receptacle.

Do not connect any other cable to this socket.

MAIN POWER switch (page 39)

Use this switch to turn on “I” and off “o” the commercial line power applied to the projector.

Burglar lock

Attach a commercial burglar prevention cable (e.g., from Kensington) to this lock port. It is compatible with the Micro Save Security System from Kensington. This security lock is compatible with the Microsaver Security System from Kensington. Contact details for this company are given below. Kensington Technology Group ACCO Brands Inc. 2885 Campus Drive San Mateo, CA94403

Tel (650)572-2700

Fax (650)572-9675 http://www.kensington.com/ http://www.gravis.com/

Air filter (page 95)

Level-adjusting feet (page 18)

Use these feet to adjust the tilt of the projector. (Leveling feet are provided at the front and rear, right and left.)

Remote control receiver window (front) (page 15) This window receives the signal beam emitted from the remote control.

Projection lens (optional)

Lens for projecting images on the screen.

Power indicator lamp (page 39)

The lamp lights in red when the MAIN POWER switch is turned to “I” (on). It turns to green when the POWER ON button of the remote control or the main unit is pressed.

LAMP1 monitor (page 94)

This lamp lights up when the time to replace lamp unit 1 is reached. It also blinks if something unusual occurs in the lamp circuit.

LAMP2 monitor (page 94)

This lamp lights up when the time to replace lamp unit 2 is reached. It also blinks if something unusual occurs in the lamp circuit.

Temperature monitor (TEMP) (page 94) Lighting or blinking of this lamp indicates an abnormal condition of the internal temperature.

Projection lens cover lock button

This button toggles between lock and unlock of the detachable cover for the projection lens (optional).

Use this for locating the projectors when stacking two units.

12

Image 12

Contents Commercial Use Model No. PT-D7500UDear Panasonic Customer Model number PT-D7500U / PT-D7600USerial number Page Contents Precautions with regard to safety Insulate the battery using tape or similar before disposal Use only the Specified batteryDo not place liquid containers on top of the projector Do not insert any foreign objects into the projectorAccessories Do not look into the lens while the projector is being usedDo not use the old lamp unit Lamp section may breakPrecautions on handling Examples of system expansion Remote control When the operation mode selector is set to ProjectorName and function of parts When the operation mode selector is set to Computer Name and function of parts Front and side of the projector Rear view of the main unit Controls on rear panel Video in terminal Video OUT terminalRGB YPBPR2 input/RGB YPBPR1 output terminal pages 26 REMOTE2 terminalUsing the remote control unit Effective range of remote control operationLoading dry cells Setting projector ID number to remote control Using the remote control unitProcedure of ID setting Using the remote control as a PC mouse Using a wired remote controlOperation mode selector switch Installation Adjusting the leveling feetProjection scheme Installation geometry Projection distance SH Effective screen height Size EffectiveInch Installation Screen dimensions Projection distance L Zoom lensFor the screen aspect ratio Units m feet/inches WidthSW Minimum Maximum ET-D75LE2/SC 2.0-3.0 ET-D75LE1 ET-D75LE1SCET-D75LE2 ET-D75LE2SCConnection Before starting connection· SYNC/Y SDA HD/SYNC SCL Example of connecting with Video devices Video deck TBC built-in Color monitor Control PCVideo deck TBC built-in High-vision video deck Example of connecting with personal computers ConnectionControl PC PC or color monitor With RGB input terminals Example of connecting with the signal selector Color monitor with RGB input terminalInstallation of input module optional Installing the input moduleTypes of the input modules optional Procedure of installation Register the input signalRemove the slot cover Insert the input moduleConnecting signals to the input module Installation of input module optionalConnecting the signal to the analog RGB signal input module Connecting the component signalsRGB signal input module optional SUB BNCConnecting the signal to the video signal input module Connecting the video signalsVideo signal input module optional BNCConnecting the component signals Serial digital input module optional ET-MD95SD1 for 480i/576iSD signal Business-use digital video deck ET-MD95SD2 for 480p/480i/576iET-MD95SD3 for HD SDI AutoConnecting signals to the DVI signal input module Pin No SignalDVI-D input module optional How to install the projection lens How to remove the projection lensPull the projection lens Powering up the projector Making adjustment and selectionPress the l button. on the main unit or the remote control Roughly adjust the focus of the lens. Refer toPowering off the projector ProjectionHow to adjust the lens Adjustment range after lens position optical shiftChoose an item and adjust it using Buttons Floor projectionFloor projection Ceiling projection Be sure to tighten the fixing screws beforeTransportation Automatic adjustment Auto Setup Registration of input signal data NEW Signal Input screen will be displayedRegistration of new data Press the Menu buttonIf new registration is not available because of full memory Confirm overwriting registration screen will be displayedHow to register into sub memory How to erase sub memoryChange registered signals screen will appear Sub memoryOn-screen indications RestrictionsDesignation can be set by the sub memory items Using the Freeze function Using the Shutter functionUsing the digital zoom D.ZOOM + function On-screen menus Structure of menu screensMenu items setting Resetting to the factory defaultBasic operations on menu screen Returning to the previous screenAdjusting the picture Switching the picture modeSwitching the AI control Select Picture Mode with the buttonsAdjusting Contrast / Bright / Color / Tint Adjustment procedure to adjust picture color intensityAdjust the level with Buttons Repeat Steps To adjust BRIGHT, Color or TintAdjusting the color temperature Operation Adjustment RemarksUSER, STANDARD, NATURAL, CINEMA, Graphic Adjusting color matching Procedure of adjustmentSelect the desired color for adjustment With the buttons Select Picture with the buttons Press Enter buttonSharpness / Gamma / Noise reduction / Pulldown mode Adjustment items OperationSelect Picture with the buttons Signal level To input Betacam with YCbCrTo set the sRGB compliant picture SmpteAdjusting the position Shift adjustmentSize adjustment Size adjustment screen will be displayedSize modes Blanking adjustment Select Blanking with the buttons Press the Enter buttonClock phase adjustment Adjusting the input resolution Input Resolution screen will be displayedTotal DOTS, Displayed DOTS, Total Lines and Displayed Lines Adjusting the clamp position Select Position with the buttons Press the Enter buttonClamp Position screen will be displayed Value changes from 1 toAdjust the Keystone horizontally With the buttons Adjust the vertical Linearity with ButtonsKeystone distortion correction Select Keystone with the buttons Press the Enter buttonEdge blending adjustment Specify the area to be adjusted with the buttonsTo display the adjustment marker Adjustment markerChanging the display language Select the Bright with the buttons Press the Enter buttonSelect the Language with the buttons Press the Enter button How to change the system format Procedure of setting Video Setting screen will be displayedSelect Option with the buttons Press the Enter button Option screen will be displayedHow to use RGB Reality mode Option settings ID number settingID number need not be set when only one projector is used Installation Setting FRONT-F FRONT-C REAR-C REAR-FLamp power Lamp selectLamp cooling time RGB2 selectVideo setting Automatic adjustmentSystem information Fan controlMain window SubwindowFrame lock TypeSetting FUNC1 PasswordList of P in P Setting the contrast mode Select Option with the buttons Press Enter buttonMode ContrastNormal Maximum Brightness Maximum NormalThese buttons toggle between 75 Ω and HI-Z TTL SYNC. TermHI-Z TTL Using the serial terminals Pin assignments and signal namesCommunication conditions Factory setting Examples of connectionProcedure of setting communication conditions RS232C Setting screen will be displayedPress and buttons to select Option Press the Enter button Control commands Cable specificationsConnecting to a PC Computer Projector DTE specifications Using the Remote 2 terminal Pin assignments and controlSub 9-pin female External appearanceDisplaying the internal test pattern RS-422 control functionsCycle of displayed internal test patterns How to use network module optional Example of connectionName and function of network module parts Initial setting of network module Network Setting screen will be displayedMenu screen will be displayed Address automatically using the Dhcp server Items Function DescriptionSet to OFF if Dhcp server is not used Port NoAccessing from the Web browser Network setting TopNetwork setting Projector control Status indication Mail setting SmtpMail setting page continuing How to use network module optional For control of image files Indication of monitor lamp Lamp Information Checkpoint Remedial measureIndication MonitorCleaning and replacement of air filter Procedure of cleaningClean the air filter Dismantle the air filterReplacement of lamp unit Timing of lamp unit replacementProcedure of lamp unit replacement Fixing screws Lamp unit coverPress the Enter button. When OK? is displayed, press An item Lamp Reset will be addedUsed hours of the specified lamp unit will be reset to zero Symptoms Checkpoint Power does not turn onRemote control does No image appears onSpecifications PT-D7500UPT-D7500U PT-D7600U Compatible RGB/YPBPR Signals AppendixOutside dimensions 530 Units mminchConcernant LA Sécurité Précautions concernant la sécurité Ne pas couvrir le filtre et la sortie d’airNe pas surcharger la prise de courant Ne pas retirer le couvercle ou le modifierNe pas placer le projecteur sur des surfaces instables Ne pas placer des récipients de liquide sur le projecteurNe démontez pas le bloc lampe Ne pas mettre d’objets étrangers dans le projecteur’utiliser que la pile indiquée Nutilisez pas un bloc lampe usagéCela peut entraîner une rupture de la lampe Sinon cela peut causer des chocs électriquesNettoyage et maintenance Précautions pour la manipulationMise au rebut Remplacement de la lampe Période de remplacement de la lampeProcédure de remplacement de la lampe La lampe est chaude si elle vient d’être utiliséeVis de fixation Cache de la lampe 111 Professional/Industrial Video Technical Support800 FAX 201 Mail pbtssupport@panasonic.com Panasonic Canada Inc