Panasonic PT-D7600U operating instructions Changing the display language

Page 66

Adjusting the position

BRIGHT ADJUST

BRIGHT INSIDE	6
BRIGHT OUTSIDE	6

UPPER	0
LOWER	0
LEFT	0
RIGHT	0

:MENU SELECT :ADJUST

Select the “BRIGHT” with the buttons.

Press the ENTER button.

The BRIGHT ADJUST screen will be displayed.

Select the “BRIGHT INSIDE” with the

buttons.

Adjust the compensation value (0-255)

with the buttons.

Select the part of Upper, Lower, Right

or Left with buttons.

Adjust the width which do not

compensate with buttons (0-255). Select the "BRIGHT OUTSIDE" with the

buttons.

Adjust the compensation value (0-255)

with the buttons.

Note • BRIGHT adjustment is used to avoid the conspicuous BRIGHT of the part in which picture images are superimposed on each other when multi-screens are displayed using the edge blending system.

The optimal point will be achieved when correction is made so that BRIGHT will be the same in the part in which images are superimposed and in the part in which images are not superimposed by adjusting the BRIGHT inside.

Adjust the widths of the top, bottom, left and right if the image looks brighter only in the vicinity of the borders between the overlapping and non-overlapping parts after making BRIGHT adjustment.

If the image becomes darker only in the vicinity of the borders after width adjustments, also adjust the BRIGHT outside.

Changing the display language

MAIN MENU

PICTURE

POSITION

LANGUAGE

OPTION

TEST PATTERN

SIGNAL LIST

:MENU SELECT ENTER:SUB MENU

LANGUAGE

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

ITALIANO

:SELECT

ENTER:SET

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select the “LANGUAGE” with the buttons.

Press the “ENTER” button.

The LANGUAGE screen will be displayed.

Select the desired language with the

buttons.

Press the “ENTER” button to establish your selection.

Menus, setting items, adjustment screens, and control button names will be displayed in the language the user chooses.

The available languages are: English, German (DEUTSCH), French (FRANÇAIS), Italian (ITALIANO), Spanish (ESPAÑOL), Japanese

( ) and Chinese ( ).

Note	• The on-screen display of the projector is set
	to the English language on shipping.

66

Image 66

Contents Commercial Use Model No. PT-D7500UDear Panasonic Customer Model number PT-D7500U / PT-D7600USerial number Page Contents Precautions with regard to safety Do not place liquid containers on top of the projector Insulate the battery using tape or similar before disposalUse only the Specified battery Do not insert any foreign objects into the projectorDo not use the old lamp unit AccessoriesDo not look into the lens while the projector is being used Lamp section may breakPrecautions on handling Examples of system expansion Remote control When the operation mode selector is set to ProjectorName and function of parts When the operation mode selector is set to Computer Name and function of parts Front and side of the projector Rear view of the main unit Controls on rear panel RGB YPBPR2 input/RGB YPBPR1 output terminal pages 26 Video in terminalVideo OUT terminal REMOTE2 terminalUsing the remote control unit Effective range of remote control operationLoading dry cells Setting projector ID number to remote control Using the remote control unitProcedure of ID setting Using the remote control as a PC mouse Using a wired remote controlOperation mode selector switch Installation Adjusting the leveling feetProjection scheme Installation geometry Projection distance SH Effective screen height Size EffectiveInch Installation Screen dimensions Projection distance L Zoom lensFor the screen aspect ratio Units m feet/inches WidthSW Minimum Maximum ET-D75LE2/SC 2.0-3.0 ET-D75LE2 ET-D75LE1ET-D75LE1SC ET-D75LE2SCConnection Before starting connection· SYNC/Y SDA HD/SYNC SCL Example of connecting with Video devices Video deck TBC built-in Color monitor Control PCVideo deck TBC built-in High-vision video deck Example of connecting with personal computers ConnectionControl PC PC or color monitor With RGB input terminals Example of connecting with the signal selector Color monitor with RGB input terminalInstallation of input module optional Installing the input moduleTypes of the input modules optional Remove the slot cover Procedure of installationRegister the input signal Insert the input moduleConnecting signals to the input module Installation of input module optionalRGB signal input module optional Connecting the signal to the analog RGB signal input moduleConnecting the component signals SUB BNCVideo signal input module optional Connecting the signal to the video signal input moduleConnecting the video signals BNCConnecting the component signals Serial digital input module optional ET-MD95SD1 for 480i/576iSD signal Business-use digital video deck ET-MD95SD2 for 480p/480i/576iET-MD95SD3 for HD SDI AutoConnecting signals to the DVI signal input module Pin No SignalDVI-D input module optional How to install the projection lens How to remove the projection lensPull the projection lens Press the l button. on the main unit or the remote control Powering up the projectorMaking adjustment and selection Roughly adjust the focus of the lens. Refer toPowering off the projector ProjectionChoose an item and adjust it using Buttons How to adjust the lensAdjustment range after lens position optical shift Floor projectionFloor projection Ceiling projection Be sure to tighten the fixing screws beforeTransportation Automatic adjustment Auto Setup Registration of new data Registration of input signal dataNEW Signal Input screen will be displayed Press the Menu buttonIf new registration is not available because of full memory Confirm overwriting registration screen will be displayedChange registered signals screen will appear How to register into sub memoryHow to erase sub memory Sub memoryOn-screen indications RestrictionsDesignation can be set by the sub memory items Using the Freeze function Using the Shutter functionUsing the digital zoom D.ZOOM + function On-screen menus Structure of menu screensBasic operations on menu screen Menu items settingResetting to the factory default Returning to the previous screenSwitching the AI control Adjusting the pictureSwitching the picture mode Select Picture Mode with the buttonsAdjust the level with Buttons Adjusting Contrast / Bright / Color / TintAdjustment procedure to adjust picture color intensity Repeat Steps To adjust BRIGHT, Color or TintAdjusting the color temperature Operation Adjustment RemarksUSER, STANDARD, NATURAL, CINEMA, Graphic Select the desired color for adjustment With the buttons Adjusting color matchingProcedure of adjustment Select Picture with the buttons Press Enter buttonSharpness / Gamma / Noise reduction / Pulldown mode Adjustment items OperationSelect Picture with the buttons To set the sRGB compliant picture Signal levelTo input Betacam with YCbCr SmpteAdjusting the position Shift adjustmentSize adjustment Size adjustment screen will be displayedSize modes Blanking adjustment Select Blanking with the buttons Press the Enter buttonClock phase adjustment Adjusting the input resolution Input Resolution screen will be displayedTotal DOTS, Displayed DOTS, Total Lines and Displayed Lines Clamp Position screen will be displayed Adjusting the clamp positionSelect Position with the buttons Press the Enter button Value changes from 1 toKeystone distortion correction Adjust the Keystone horizontally With the buttonsAdjust the vertical Linearity with Buttons Select Keystone with the buttons Press the Enter buttonTo display the adjustment marker Edge blending adjustmentSpecify the area to be adjusted with the buttons Adjustment markerChanging the display language Select the Bright with the buttons Press the Enter buttonSelect the Language with the buttons Press the Enter button How to change the system format Select Option with the buttons Press the Enter button Procedure of settingVideo Setting screen will be displayed Option screen will be displayedHow to use RGB Reality mode Option settings ID number settingID number need not be set when only one projector is used Installation Setting FRONT-F FRONT-C REAR-C REAR-FLamp cooling time Lamp powerLamp select RGB2 selectSystem information Video settingAutomatic adjustment Fan controlFrame lock Main windowSubwindow TypeSetting FUNC1 PasswordList of P in P Mode Setting the contrast modeSelect Option with the buttons Press Enter button ContrastNormal Maximum Brightness Maximum NormalThese buttons toggle between 75 Ω and HI-Z TTL SYNC. TermHI-Z TTL Communication conditions Factory setting Using the serial terminalsPin assignments and signal names Examples of connectionProcedure of setting communication conditions RS232C Setting screen will be displayedPress and buttons to select Option Press the Enter button Control commands Cable specificationsConnecting to a PC Computer Projector DTE specifications Sub 9-pin female Using the Remote 2 terminalPin assignments and control External appearanceDisplaying the internal test pattern RS-422 control functionsCycle of displayed internal test patterns How to use network module optional Example of connectionName and function of network module parts Initial setting of network module Network Setting screen will be displayedMenu screen will be displayed Set to OFF if Dhcp server is not used Address automatically using the Dhcp serverItems Function Description Port NoAccessing from the Web browser Network setting TopNetwork setting Projector control Status indication Mail setting SmtpMail setting page continuing How to use network module optional For control of image files Indication Indication of monitor lampLamp Information Checkpoint Remedial measure MonitorClean the air filter Cleaning and replacement of air filterProcedure of cleaning Dismantle the air filterReplacement of lamp unit Timing of lamp unit replacementProcedure of lamp unit replacement Fixing screws Lamp unit coverPress the Enter button. When OK? is displayed, press An item Lamp Reset will be addedUsed hours of the specified lamp unit will be reset to zero Remote control does Symptoms CheckpointPower does not turn on No image appears onSpecifications PT-D7500UPT-D7500U PT-D7600U Compatible RGB/YPBPR Signals AppendixOutside dimensions 530 Units mminchConcernant LA Sécurité Ne pas surcharger la prise de courant Précautions concernant la sécuritéNe pas couvrir le filtre et la sortie d’air Ne pas retirer le couvercle ou le modifierNe démontez pas le bloc lampe Ne pas placer le projecteur sur des surfaces instablesNe pas placer des récipients de liquide sur le projecteur Ne pas mettre d’objets étrangers dans le projecteurCela peut entraîner une rupture de la lampe ’utiliser que la pile indiquéeNutilisez pas un bloc lampe usagé Sinon cela peut causer des chocs électriquesNettoyage et maintenance Précautions pour la manipulationMise au rebut Remplacement de la lampe Période de remplacement de la lampeProcédure de remplacement de la lampe La lampe est chaude si elle vient d’être utiliséeVis de fixation Cache de la lampe 111 800 FAX 201 Mail pbtssupport@panasonic.com Professional/Industrial VideoTechnical Support Panasonic Canada Inc