Panasonic PT-D7600U How to use network module optional, Example of connection

Page 83

How to use network module (optional)

The network module of the projector (ET-MD75NT) is provided with a LAN interface to enable projector control from the Web browser of personal computer.

In addition, the network module also fulfills automatic E-mail transmission function. It can send mail to a predefined E-mail address when the system malfunctions or when the lamp used hours reaches the set value.

Example of connection

A LAN cable is required to use the network module.

PC

Projector

LAN cable (straight)

LAN cable (straight)

Hub

•A Web browser is required to use this function. Make sure that a Web browser is available in the system.

•Use Microsoft Windows 95/98/Me or Windows NT4.0/Windows 2000/XP for the OS of your personal computer.

•The Web browser should be Internet Explorer 5.01 or later or Netscape Navigator/Communicator 4.75 or later.

•To use the E-mail function, communication with E-mail server must be established. Make sure that E-mail feature is available in your system.

•Use a LAN cable of straight connection and compatible to Category 5.

•The length of LAN cable must be 100 m or shorter.

Name and function of network module parts

Function switch

Use this function to return the network module setting to the factory setting.

Serial input/output terminal

A special terminal for service person.

Connect nothing here.

LAN terminal (10Base-T/100Base-TX)

Connect LAN cable here.

FUNCTION
ON-LINE	SERIAL	RECEIVE	TRANSMIT
Network Module	SERIAL
Network Module

On-line lamp			LAN signal sending lamp

This lamp lights up when the system gets ready			Blinks when sending signals.
for LAN connection.
Unlit or blinking lamp indicates that the system is			LAN signal receiving lamp
in preparation for LAN connection.			Blinks when receiving
			signals.

Attention

•If the LAN terminal is touched by electrostatically charged hands (or body), failure may be caused by the discharge of static electricity.

Be careful not to touch metallic part of LAN terminal or LAN cable.

83

Image 83

Contents Model No. PT-D7500U Commercial UseSerial number Dear Panasonic CustomerModel number PT-D7500U / PT-D7600U Page Contents Precautions with regard to safety Do not insert any foreign objects into the projector Insulate the battery using tape or similar before disposalUse only the Specified battery Do not place liquid containers on top of the projectorLamp section may break AccessoriesDo not look into the lens while the projector is being used Do not use the old lamp unitPrecautions on handling Examples of system expansion Name and function of parts Remote controlWhen the operation mode selector is set to Projector When the operation mode selector is set to Computer Name and function of parts Front and side of the projector Rear view of the main unit Controls on rear panel REMOTE2 terminal Video in terminalVideo OUT terminal RGB YPBPR2 input/RGB YPBPR1 output terminal pages 26Loading dry cells Using the remote control unitEffective range of remote control operation Procedure of ID setting Setting projector ID number to remote controlUsing the remote control unit Operation mode selector switch Using the remote control as a PC mouseUsing a wired remote control Projection scheme Installation geometry InstallationAdjusting the leveling feet Inch Projection distance SH Effective screen heightSize Effective For the screen aspect ratio Units m feet/inches InstallationScreen dimensions Projection distance L Zoom lens WidthSW Minimum Maximum ET-D75LE2/SC 2.0-3.0 ET-D75LE2SC ET-D75LE1ET-D75LE1SC ET-D75LE2· SYNC/Y SDA HD/SYNC SCL ConnectionBefore starting connection Video deck TBC built-in High-vision video deck Example of connecting with Video devicesVideo deck TBC built-in Color monitor Control PC Control PC PC or color monitor With RGB input terminals Example of connecting with personal computersConnection Color monitor with RGB input terminal Example of connecting with the signal selectorTypes of the input modules optional Installation of input module optionalInstalling the input module Insert the input module Procedure of installationRegister the input signal Remove the slot coverInstallation of input module optional Connecting signals to the input moduleSUB BNC Connecting the signal to the analog RGB signal input moduleConnecting the component signals RGB signal input module optionalBNC Connecting the signal to the video signal input moduleConnecting the video signals Video signal input module optionalConnecting the component signals ET-MD95SD1 for 480i/576i Serial digital input module optionalET-MD95SD2 for 480p/480i/576i SD signal Business-use digital video deckAuto ET-MD95SD3 for HD SDIDVI-D input module optional Connecting signals to the DVI signal input modulePin No Signal Pull the projection lens How to install the projection lensHow to remove the projection lens Roughly adjust the focus of the lens. Refer to Powering up the projectorMaking adjustment and selection Press the l button. on the main unit or the remote controlProjection Powering off the projectorFloor projection How to adjust the lensAdjustment range after lens position optical shift Choose an item and adjust it using ButtonsTransportation Floor projection Ceiling projectionBe sure to tighten the fixing screws before Automatic adjustment Auto Setup Press the Menu button Registration of input signal dataNEW Signal Input screen will be displayed Registration of new dataConfirm overwriting registration screen will be displayed If new registration is not available because of full memorySub memory How to register into sub memoryHow to erase sub memory Change registered signals screen will appearDesignation can be set by the sub memory items On-screen indicationsRestrictions Using the digital zoom D.ZOOM + function Using the Freeze functionUsing the Shutter function Structure of menu screens On-screen menusReturning to the previous screen Menu items settingResetting to the factory default Basic operations on menu screenSelect Picture Mode with the buttons Adjusting the pictureSwitching the picture mode Switching the AI controlRepeat Steps To adjust BRIGHT, Color or Tint Adjusting Contrast / Bright / Color / TintAdjustment procedure to adjust picture color intensity Adjust the level with ButtonsUSER, STANDARD, NATURAL, CINEMA, Graphic Adjusting the color temperatureOperation Adjustment Remarks Select Picture with the buttons Press Enter button Adjusting color matchingProcedure of adjustment Select the desired color for adjustment With the buttonsSelect Picture with the buttons Sharpness / Gamma / Noise reduction / Pulldown modeAdjustment items Operation Smpte Signal levelTo input Betacam with YCbCr To set the sRGB compliant pictureShift adjustment Adjusting the positionSize adjustment screen will be displayed Size adjustmentSize modes Select Blanking with the buttons Press the Enter button Blanking adjustmentClock phase adjustment Total DOTS, Displayed DOTS, Total Lines and Displayed Lines Adjusting the input resolutionInput Resolution screen will be displayed Value changes from 1 to Adjusting the clamp positionSelect Position with the buttons Press the Enter button Clamp Position screen will be displayedSelect Keystone with the buttons Press the Enter button Adjust the Keystone horizontally With the buttonsAdjust the vertical Linearity with Buttons Keystone distortion correctionAdjustment marker Edge blending adjustmentSpecify the area to be adjusted with the buttons To display the adjustment markerSelect the Language with the buttons Press the Enter button Changing the display languageSelect the Bright with the buttons Press the Enter button How to change the system format Option screen will be displayed Procedure of settingVideo Setting screen will be displayed Select Option with the buttons Press the Enter buttonHow to use RGB Reality mode ID number need not be set when only one projector is used Option settingsID number setting FRONT-F FRONT-C REAR-C REAR-F Installation SettingRGB2 select Lamp powerLamp select Lamp cooling timeFan control Video settingAutomatic adjustment System informationType Main windowSubwindow Frame lockList of P in P Setting FUNC1Password ContrastNormal Maximum Brightness Maximum Normal Setting the contrast modeSelect Option with the buttons Press Enter button ModeHI-Z TTL These buttons toggle between 75 Ω and HI-Z TTLSYNC. Term Examples of connection Using the serial terminalsPin assignments and signal names Communication conditions Factory settingPress and buttons to select Option Press the Enter button Procedure of setting communication conditionsRS232C Setting screen will be displayed Connecting to a PC Computer Projector DTE specifications Control commandsCable specifications External appearance Using the Remote 2 terminalPin assignments and control Sub 9-pin femaleCycle of displayed internal test patterns Displaying the internal test patternRS-422 control functions Name and function of network module parts How to use network module optionalExample of connection Menu screen will be displayed Initial setting of network moduleNetwork Setting screen will be displayed Port No Address automatically using the Dhcp serverItems Function Description Set to OFF if Dhcp server is not usedAccessing from the Web browser Top Network settingNetwork setting Projector control Status indication Smtp Mail settingMail setting page continuing How to use network module optional For control of image files Monitor Indication of monitor lampLamp Information Checkpoint Remedial measure IndicationDismantle the air filter Cleaning and replacement of air filterProcedure of cleaning Clean the air filterTiming of lamp unit replacement Replacement of lamp unitFixing screws Lamp unit cover Procedure of lamp unit replacementUsed hours of the specified lamp unit will be reset to zero Press the Enter button. When OK? is displayed, pressAn item Lamp Reset will be added No image appears on Symptoms CheckpointPower does not turn on Remote control doesPT-D7500U SpecificationsPT-D7500U PT-D7600U Appendix Compatible RGB/YPBPR Signals530 Units mminch Outside dimensionsConcernant LA Sécurité Ne pas retirer le couvercle ou le modifier Précautions concernant la sécuritéNe pas couvrir le filtre et la sortie d’air Ne pas surcharger la prise de courantNe pas mettre d’objets étrangers dans le projecteur Ne pas placer le projecteur sur des surfaces instablesNe pas placer des récipients de liquide sur le projecteur Ne démontez pas le bloc lampeSinon cela peut causer des chocs électriques ’utiliser que la pile indiquéeNutilisez pas un bloc lampe usagé Cela peut entraîner une rupture de la lampeMise au rebut Nettoyage et maintenancePrécautions pour la manipulation Période de remplacement de la lampe Remplacement de la lampeVis de fixation Cache de la lampe Procédure de remplacement de la lampeLa lampe est chaude si elle vient d’être utilisée 111 Panasonic Canada Inc Professional/Industrial VideoTechnical Support 800 FAX 201 Mail pbtssupport@panasonic.com