Panasonic PT-D7600U Adjusting Contrast / Bright / Color / Tint, Adjust the level with Buttons

Adjusting the picture

The desired picture can be obtained by following the procedure below.

Adjusting Contrast / Bright / Color / Tint

Adjustment procedure – to adjust picture (color intensity)

MAIN MENU

PICTURE

POSITION

LANGUAGE

OPTION

TEST PATTERN

SIGNAL LIST

:MENU SELECT

ENTER:SUB MENU

PICTURE

PICTURE MODE	STANDARD
COLOR	50
TINT	30
COLOR TEMP.	STANDARD
GAMMA	STANDARD
CONTRAST	32
BRIGHT	32
SHARPNESS	6
NOISE REDUCTION	2
AI CONTROL	OFF
:MENU SELECT
:ADJUST
CONTRAST	32

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select “PICTURE” with the buttons.

Press the “ENTER” button.

The PICTURE screen will be displayed.

Select “CONTRAST” with the buttons.

Press the “ENTER” button.

The CONTRAST individual adjustment screen will be displayed.

			Adjust the level with the					buttons.
			Thu function of the button changes according to
			the item as shown in the following table:
			Repeat Steps ,			and		to adjust
			the “BRIGHT”, “COLOR” or “TINT”.
			The individual adjustment screen can be displayed
			for “CONTRAST” and BRIGHT” by the remote
			control. Refer to the following table:
Item	Operation		Adjustment	Adjustment range				Remarks
CONTRAST	Press	button	Raises the picture brightness and the picture becomes clearer.		Maximum value 63		Use the CONTRAST button
							on the remote control.
	Press	button	Lowers the picture brightness and weakens the picture.		Minimum value 0
BRIGHT	Press	button	Raises the picture brightness.		Maximum value 63		Use the BRIGHT button on
	Press	button	Lowers the picture brightness.		Minimum value 0		the remote control.
COLOR	Press	button	Deepens colors.		Maximum value 100
	Press	button	Weakens colors.		Minimum value 0
TINT	Press	button	Adjusts skin tone toward greenish color.		Maximum value 60
	Press	button	Adjusts skin tone toward reddish-purple		Minimum value 0

Note • If no button is operated for approx. 5 seconds while the individual adjustment screen is displayed, the screen will return to the “PICTURE” screen.

52