Panasonic PT-D7600U ET-MD95SD2 for 480p/480i/576i, SD signal Business-use digital video deck

1.For 480p dual link (4:2:2p) SMPTE294M-compliant, 720x483 active line 59.94 Hz progressive scan 270 Mbps

Serial digital input module (optional)

ET-MD95SD2 (for 480p/480i/576i)

MAIN IN	MAIN OUT		SUB IN	SUB OUT
480p Module		SERIAL
ET-MD95SD2

	SD signal
MAIN	SUB
(Link-A)	(Link-B) MAIN	SUB
	(Link-A)	(Link-B)

Business-use digital video deck

SD signal output (active through)

2.1) For 480p single link (4:2:0p) SMPTE294M-compliant, 720x483 active line 59.94 Hz progressive scan 360 Mbps

2.2) For 480i (4:2:2): SMPTE259M-compliant, 59.94 Hz 525 Line 270 Mbps

3) For 576i (4:2:2): SMPTE259M-compliant, 50 Hz 625 Line 270 Mbps

Serial digital input module (optional)

ET-MD95SD2 (for 480p/480i/576i)

MAIN IN	MAIN OUT		SUB IN	SUB OUT
480p Module		SERIAL
ET-MD95SD2

SD signal

Business-use digital video deck

Connect nothing to SUB IN/OUT terminals.

SD signal output (active through)

•Insert the input module that meets the input signal specifications.

•Use the SYSTEM SELECTOR button to select the input module that meets desired one of the above four types of signal specifications. While toggling through those four types, input signal and other information are displayed and cleared on the screen automatically.

•Normally, use SYSTEM SELECTOR in “AUTO”.

•Automatic detection may malfunction if connection is made in any other way than listed above or if any unstable signal is connected. If this happens, switch to a system that is compatible with the signal format using the SYSTEM SELECTOR button.

•Use a 3C2W or superior cable for connection to transmit the image information without error. (Example: 3C2W, 3CFB, 4CFB, 5C2W, 5CFB, 5CFTX, 7CFB etc.)

35