How to use RGB Reality mode

Panasonic PT-D7600U operating instructions How to use RGB Reality mode

Page 69

RGB REALITY mode converts RGB (primary colors) input signals into component signals and achieves the high- quality playback by motion-image-specific picture conversion process.

This mode is effective only when the signal input is applied to the RGB input signal module (ET-MD95RGB). The appropriate mode can be selected according to the signal. (Refer to page 67)

RGB mode: For RGB signals input from a PC etc. (mostly still images)

RGB REALITY mode: For RGB signals input from a scan converter etc. (mostly motion images)

The following are the signals that can be converted into RGB REALITY mode:

Signal name	fH(kHz)/fV(Hz)	RGB mode	RGB REALITY mode	Remarks
480i	15.73/60
576i	15.63/50
480p	31.47/60
720/60p	45.00/60
1035/60i	33.75/60
1080/60i	33.75/60
1080/24p	27.00/24
1080/50i	28.12/50
1080/30p	33.75/30
1080/25p	28.12/25
1080/24sF	27.00/48
Others				RGB mode only

: Supported (Factory default)

: Supported (To use the signal in the mode with , select the signal with the SYSTEM SELECTOR button and register it.)

: Use the signal in the RGB REALITY mode because the signal may not be supported depending on the state of the signal.

: Not supported

Note • The automatic picture adjustment (page 43) and the adjustment of the input resolution (page 62) cannot be performed because the optimal adjustment value is preset in the RGB REALITY mode.

•The projector's adjustment functions in the RGB REALITY mode are the same as those for the YPBPR (or YCbCr) input.

Image 69

Contents

Model No. PT-D7500U Commercial UseDear Panasonic Customer Model number PT-D7500U / PT-D7600USerial number Page Contents Precautions with regard to safety Use only the Specified battery Insulate the battery using tape or similar before disposalDo not place liquid containers on top of the projector Do not insert any foreign objects into the projectorDo not look into the lens while the projector is being used AccessoriesDo not use the old lamp unit Lamp section may breakPrecautions on handling Examples of system expansion Remote control When the operation mode selector is set to ProjectorName and function of parts When the operation mode selector is set to Computer Name and function of parts Front and side of the projector Rear view of the main unit Controls on rear panel Video OUT terminal Video in terminalRGB YPBPR2 input/RGB YPBPR1 output terminal pages 26 REMOTE2 terminalUsing the remote control unit Effective range of remote control operationLoading dry cells Setting projector ID number to remote control Using the remote control unitProcedure of ID setting Using the remote control as a PC mouse Using a wired remote controlOperation mode selector switch Installation Adjusting the leveling feetProjection scheme Installation geometry Projection distance SH Effective screen height Size EffectiveInch Installation Screen dimensions Projection distance L Zoom lensFor the screen aspect ratio Units m feet/inches WidthSW Minimum Maximum ET-D75LE2/SC 2.0-3.0 ET-D75LE1SC ET-D75LE1ET-D75LE2 ET-D75LE2SCConnection Before starting connection· SYNC/Y SDA HD/SYNC SCL Example of connecting with Video devices Video deck TBC built-in Color monitor Control PCVideo deck TBC built-in High-vision video deck Example of connecting with personal computers ConnectionControl PC PC or color monitor With RGB input terminals Color monitor with RGB input terminal Example of connecting with the signal selectorInstallation of input module optional Installing the input moduleTypes of the input modules optional Register the input signal Procedure of installationRemove the slot cover Insert the input moduleInstallation of input module optional Connecting signals to the input moduleConnecting the component signals Connecting the signal to the analog RGB signal input moduleRGB signal input module optional SUB BNCConnecting the video signals Connecting the signal to the video signal input moduleVideo signal input module optional BNCConnecting the component signals ET-MD95SD1 for 480i/576i Serial digital input module optionalET-MD95SD2 for 480p/480i/576i SD signal Business-use digital video deckAuto ET-MD95SD3 for HD SDIConnecting signals to the DVI signal input module Pin No SignalDVI-D input module optional How to install the projection lens How to remove the projection lensPull the projection lens Making adjustment and selection Powering up the projectorPress the l button. on the main unit or the remote control Roughly adjust the focus of the lens. Refer toProjection Powering off the projectorAdjustment range after lens position optical shift How to adjust the lensChoose an item and adjust it using Buttons Floor projectionFloor projection Ceiling projection Be sure to tighten the fixing screws beforeTransportation Automatic adjustment Auto Setup NEW Signal Input screen will be displayed Registration of input signal dataRegistration of new data Press the Menu buttonConfirm overwriting registration screen will be displayed If new registration is not available because of full memoryHow to erase sub memory How to register into sub memoryChange registered signals screen will appear Sub memoryOn-screen indications RestrictionsDesignation can be set by the sub memory items Using the Freeze function Using the Shutter functionUsing the digital zoom D.ZOOM + function Structure of menu screens On-screen menusResetting to the factory default Menu items settingBasic operations on menu screen Returning to the previous screenSwitching the picture mode Adjusting the pictureSwitching the AI control Select Picture Mode with the buttonsAdjustment procedure to adjust picture color intensity Adjusting Contrast / Bright / Color / TintAdjust the level with Buttons Repeat Steps To adjust BRIGHT, Color or TintAdjusting the color temperature Operation Adjustment RemarksUSER, STANDARD, NATURAL, CINEMA, Graphic Procedure of adjustment Adjusting color matchingSelect the desired color for adjustment With the buttons Select Picture with the buttons Press Enter buttonSharpness / Gamma / Noise reduction / Pulldown mode Adjustment items OperationSelect Picture with the buttons To input Betacam with YCbCr Signal levelTo set the sRGB compliant picture SmpteShift adjustment Adjusting the positionSize adjustment screen will be displayed Size adjustmentSize modes Select Blanking with the buttons Press the Enter button Blanking adjustmentClock phase adjustment Adjusting the input resolution Input Resolution screen will be displayedTotal DOTS, Displayed DOTS, Total Lines and Displayed Lines Select Position with the buttons Press the Enter button Adjusting the clamp positionClamp Position screen will be displayed Value changes from 1 toAdjust the vertical Linearity with Buttons Adjust the Keystone horizontally With the buttonsKeystone distortion correction Select Keystone with the buttons Press the Enter button Specify the area to be adjusted with the buttons Edge blending adjustment To display the adjustment marker Adjustment markerChanging the display language Select the Bright with the buttons Press the Enter buttonSelect the Language with the buttons Press the Enter button How to change the system format Video Setting screen will be displayed Procedure of settingSelect Option with the buttons Press the Enter button Option screen will be displayedHow to use RGB Reality mode Option settings ID number settingID number need not be set when only one projector is used FRONT-F FRONT-C REAR-C REAR-F Installation SettingLamp select Lamp powerLamp cooling time RGB2 selectAutomatic adjustment Video settingSystem information Fan controlSubwindow Main windowFrame lock TypeSetting FUNC1 PasswordList of P in P Select Option with the buttons Press Enter button Setting the contrast modeMode ContrastNormal Maximum Brightness Maximum NormalThese buttons toggle between 75 Ω and HI-Z TTL SYNC. TermHI-Z TTL Pin assignments and signal names Using the serial terminalsCommunication conditions Factory setting Examples of connectionProcedure of setting communication conditions RS232C Setting screen will be displayedPress and buttons to select Option Press the Enter button Control commands Cable specificationsConnecting to a PC Computer Projector DTE specifications Pin assignments and control Using the Remote 2 terminalSub 9-pin female External appearanceDisplaying the internal test pattern RS-422 control functionsCycle of displayed internal test patterns How to use network module optional Example of connectionName and function of network module parts Initial setting of network module Network Setting screen will be displayedMenu screen will be displayed Items Function Description Address automatically using the Dhcp serverSet to OFF if Dhcp server is not used Port NoAccessing from the Web browser Top Network settingNetwork setting Projector control Status indication Smtp Mail settingMail setting page continuing How to use network module optional For control of image files Lamp Information Checkpoint Remedial measure Indication of monitor lampIndication MonitorProcedure of cleaning Cleaning and replacement of air filterClean the air filter Dismantle the air filterTiming of lamp unit replacement Replacement of lamp unitFixing screws Lamp unit cover Procedure of lamp unit replacementPress the Enter button. When OK? is displayed, press An item Lamp Reset will be addedUsed hours of the specified lamp unit will be reset to zero Power does not turn on Symptoms CheckpointRemote control does No image appears onPT-D7500U SpecificationsPT-D7500U PT-D7600U Appendix Compatible RGB/YPBPR Signals530 Units mminch Outside dimensionsConcernant LA Sécurité Ne pas couvrir le filtre et la sortie d’air Précautions concernant la sécuritéNe pas surcharger la prise de courant Ne pas retirer le couvercle ou le modifierNe pas placer des récipients de liquide sur le projecteur Ne pas placer le projecteur sur des surfaces instablesNe démontez pas le bloc lampe Ne pas mettre d’objets étrangers dans le projecteurNutilisez pas un bloc lampe usagé ’utiliser que la pile indiquéeCela peut entraîner une rupture de la lampe Sinon cela peut causer des chocs électriquesNettoyage et maintenance Précautions pour la manipulationMise au rebut Période de remplacement de la lampe Remplacement de la lampeProcédure de remplacement de la lampe La lampe est chaude si elle vient d’être utiliséeVis de fixation Cache de la lampe 111 Technical Support Professional/Industrial Video800 FAX 201 Mail pbtssupport@panasonic.com Panasonic Canada Inc

Panasonic PT-D7600U operating instructions How to use RGB Reality mode

How to use RGB REALITY mode