FPC 5084
(2)
Clear NVRAM
Use this item to clear the data in the NVRAM (CMOS). Here are the options for your selection, No and Yes.
Plug & Play O/S
When the setting is No, Use this item to configure all the devices in the system. When the setting is Yes and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. The default setting is No.
PCI Latency Timer
This item controls how long a PCI device can hold the PCI bus before another takes over. The longer the latency, the longer the PCI device can retain control of the bus before handing it over to another PCI device. There are several options for your selection.
Allocate IRQ to PCI VGA
This item allows BIOS to choose an IRQ to assign for the PCI VGA card. Here are the options for your selection, No
42 | AMI BIOS Setup Utility |