Telephone User Interface
Adjusting audio volume
1.Dial in to the conference as chairperson or as a regular participant.
2.Enter the conference ID.
3.Enter the conference password (if configured).
4.Enter *7.
The command *7 accesses the volume control feature. Figure 33 shows how to operate this feature.
Figure 33: Volume control feature operation
When a selection is made, the system applies the command, plays a confirmation tone, and returns the user to the conference.
Each selection of the command advances one step in the required direction. To advance more than one step, the entire sequence must be repeated. For example, to reach the maximum volume in the listen direction, dial: *76 *76 *76.
You can interrupt the menu. That is, the
76