Rockford Fosgate 700S Installation, Mounting Locations, Battery and Charging, Wiring the System

Page 6

INSTALLATION

9.ALWAYS protect the battery and electrical system from damage with proper fusing. Install the appropriate fuse holder and fuse on the +12V power wire within 18” (45.7 cm) of the battery terminal.

10.When grounding to the chassis of the vehicle, scrape all paint from the metal to ensure a good, clean ground connection. Grounding connections should be as short as possible and always be connected to metal that is welded to the main body, or chassis, of the vehicle.

MOUNTING LOCATIONS

The mounting position of your amplified subwoofer will have a great effect on the sound performance produced.

Engine Compartment

Never mount this unit in the engine compartment. Mounting the unit in the engine compartment will void your warranty.

Trunk Mounting

Mounting the amplifier vertically will provide the best cooling of the amplifier.

Mounting the amplifier on the floor of the trunk will work but provides less cooling capability than vertical mounting.

Mounting the amplifier upside down to the rear deck of the trunk will not provide proper cooling and will severely affect the performance of the amplifier and is strongly not recommended.

Passenger Compartment Mounting

Mounting the amplifier in the passenger compartment will work as long as you provide a sufficient amount of air for the amplifier to cool itself. If you are going to mount the amplifier under the seat of the vehicle, you must have at least 1" (2.54cm) of air gap around the amplifier's heatsink.

Mounting the amplifier with less than 1" (2.54cm) of air gap around the amplifier's heatsink in the passenger compartment will not provide proper cooling and will severely affect the performance of the amplifier and is strongly not recommended.

BATTERY AND CHARGING

Amplifiers will put an increased load on the vehicle's battery and charging system. We recommend checking your alternator and battery condition to ensure that the electrical system has enough capacity to handle the increased load of your stereo system. Stock electrical systems which are in good condition should be able to handle the extra load of any Rockford Fosgate amplifier without problems, although battery and alternator life can be reduced slightly. To maximize the performance of your amplifier, we suggest the use of a heavy duty battery and an energy storage capacitor.

WIRING THE SYSTEM

!CAUTION: If you do not feel comfortable with wiring your new unit, please see your local Authorized Rockford Fosgate Dealer for installation.

!CAUTION: Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.

CAUTION: Avoid running power wires near the low level input cables, antenna,

!power leads, sensitive equipment or harnesses. The power wires carry substantial current and could induce noise into the audio system.

1.Plan the wire routing. Keep RCA cables close together but isolated from the amplifier's power cables and any high power auto accessories, especially electric motors. This is done to prevent coupling the noise from radiated electrical fields into the audio signal. When feeding the wires through the firewall or any metal barrier, protect them with plastic or rubber grommets to prevent short circuits. Leave the wires long at this point to adjust for a precise fit at a later time.

2.Prepare the RED wire (power cable) for attachment to the amplifier by stripping 1/2" of insulation from the end of the wire. Insert the bared wire into the B+ terminal and tighten the set screw to secure the cable in place.

6

Image 6
Contents Channel Amplifiers Table of Contents IntroductionSafety Instructions Contents of CartonDesign Features Installation Installation Considerations Wiring the System InstallationBattery and Charging Mounting LocationsPower Connection Models 150S 200S RCA or High Level input connection Channel Wiring Models 150S & 200S Bridged/Mono Wiring All Other ModelsInstallation Using Passive Crossovers Speaker ImpedanceMounting and installation Operation Adjusting GainAdjusting Crossover Frequency Mounting Clip KnobConnecting Links AccessoriesConnecting Punch Capacitors OperationProcedure 2 Check Amplifier for audio output TroubleshootingProcedure 1 Check Amplifier for proper connections Procedure 3 Check Amplifier if you experience Turn-on PopSpecifications MODEL- PunchLimited Warranty Information Ship to ElectronicsFrançais Table DES MatièresConsignes DE Sécurité Contenu DE LemballageParticularités Techniques 400S, 500S et 700SInstallation Considérations Concernant L’INSTALLATION Emplacements DE Montage Batterie ET ChargeCâblage DU Système Connexion Dalimentation Modèles 150S Et 200S Connexion pour entrée RCA OU de signaux élevés Câblage à 2 voies Modèles 150S et 200S Câblage ponté/mono Tous les autres modèlesCâblage à 2 voies Tous les autres modèles Installation Utilisation DE Filtres Impédance de haut-parleurInstallation Basses Punch À Télécommande Fonctionnement Réglage DU GainRéglage DE LA Fréquence DU Filtre Passif Tous les autres modèles AccessoiresFonctionnement Condensateurs de connexion PunchDépannage Procédure 2 vérifiez la sortie audio de l’ampliFrançais CaractéristiquesInformations SUR LA Garantie Limitée Amplificateurs Punch 2 ansSources audio 1 an Haut-parleurs 1 an Introducción Índice DE MateriasInstrucciones DE Seguridad Contenido DE LA CajaCaracterísticas DEL Diseño Corriente Modelos 300S 400S y 500S Conexiones de Modelo 700SInstalación Consideraciones Para LA Instalación Batería Y Carga InstalaciónLugares DE Montaje Cableado DEL SistemaConexión de Corriente Modelos 150S y 200S Conexiones de Corriente Modelos 300S 400S y 500S Cableado de 2 canales Modelos 150S y 200S Cableado con puente/Mono Todos los demás modelosCableado de 2 canales Todos los demás modelos Impedancia del altavoz USO DE X-OVERS Pasivos Transiciones PasivasAjuste DE LA Frecuencia X-OVER Transición Modelo 200S Broche de Montaje Perilla CalcomaníaFuncionamiento Ajuste DE Ganancia Montaje e instalaciónAccesorios FuncionamientoTodos los demás modelos Capacitores conectores PunchSolución DE Problemas Especificaciones Modelo PunchEnviar a Electronics Información Sobre LA Garantía LimitadaAmplificadores Punch 2 años Einleitung InhaltsverzeichnisSicherheitshinweise Inhalt DES KartonsDesigncharakteristiken Modelle 300S 400S, 500S 700SEinbau Einbauüberlegungen Befolgen Sie vor dem Einbau diese einfachen RegelnBatterie UND Aufladung EinbauBefestigungsstellen Verkabelung DES SystemsStromanschlüsse Modelle 150S 200S Stromanschlüsse Modelle 300S 400S & 500S Zweikanalverkabelung Modelle 150S & 200S Überbrückete bzw. Monoverkabelung alle anderen ModelleZweikanalverkabelung alle anderen Modelle Lautsprecherimpedanz Einbau Verwendung VON Passiven CrossovernCROSSOVER-FREQUENZ Einstellen Befestigungs- klemme ReglerBetrieb Lautstärke Gain Einstellen Modell 200SZubehör BetriebAlle anderen Modelle Punch Kondensatoren anschließenOder FehlerbeseitigungVerfahren 2 Die Audioleistung des Verstärkers prüfen OrerTechnische Daten MODELL- PunchInformationen ZUR Beschränkten Garantie PUNCH-Verstärker 2 JahreIntroduzione IndiceIstruzioni DI Sicurezza Contenuto DELL’IMBALLAGGIOAlla tensione Modelli 300S, 400S e 500S Caratteristiche DEL DesignCollegamenti Modelli 150S e 200S Collegamenti alla tensione Modelli 300S, 400S, 500S e 700SInstallazione Considerazioni SULL’INSTALLAZIONE Batteria E Caricamento InstallazionePosizionamento Cablaggio DEL SistemaCollegamento alla tensione Modelli 150S e 200S Cablaggio in parallelo/monofonia Modelli 150S e 200S Cablaggio a 2 canali Modelli 150S e 200S Cablaggio in parallelo/monofonia Tutti gli altri modelliCablaggio a 2 canali Tutti gli altri modelli Installazione Come Usare LE Frequenze DI Incrocio Passive Impedenza dell’altoparlanteFunzionamento Regolazione DEL Guadagno Regolazione Della Frequenza DI IncrocioFunzionamento AccessoriCondensatori della Connecting Punch Tutti gli altri modelliINDIVIDUAZIONE/RIPARAZIONE Guasti OppureSpecifiche Modello PunchElectronics Informazioni Inerenti Alla Garanzia LimitataAmplificatori Punch 2 anni Rockford Fosgate

400S, 700S, 200S, 300S, 150S specifications

Rockford Fosgate is a renowned brand in the audio industry, particularly known for producing high-performance amplifiers designed for car audio enthusiasts. Among their impressive lineup, the Rockford Fosgate 500S, 150S, 300S, 200S, and 700S stand out for their exceptional sound quality, technological advancements, and robust construction.

The Rockford Fosgate 500S is a powerful amplifier designed to deliver 500 watts RMS in a compact format, catering to those who demand high fidelity in a smaller package. It features a Class D topology, which significantly increases efficiency while maintaining excellent sound clarity. The 500S also incorporates an adjustable crossover and a bass boost feature, allowing users to tailor the audio output to their preferences.

Next, the Rockford Fosgate 150S is a versatile 2-channel amplifier that produces 150 watts RMS. Its compact design makes it an ideal choice for smaller vehicle audio systems or as an addition to an existing setup. Built with high-grade components, the 150S ensures durable performance under pressure and is equipped with a variable low-pass crossover, which enables precise control over the frequency range.

The 300S model delivers 300 watts RMS and is designed for those seeking balance between power and clarity. It features a rugged construction, ensuring longevity, while the smart circuitry protects against overheating, short circuits, and other potential issues. Its custom-tuned enclosure further enhances audio fidelity, providing a seamless listening experience.

The Rockford Fosgate 200S is yet another impressive amplifier, offering 200 watts RMS. It combines excellent power output with a user-friendly interface. The amplifier includes a variable high-pass and low-pass crossover, enabling combinations for various speaker configurations, while its compact size allows easy installation in tight spaces.

Lastly, the 700S amplifier reigns supreme with its 700 watts RMS output, making it a powerhouse for audiophiles seeking the ultimate sound experience. Its advanced thermal management system ensures optimal performance even during extended playback. The 700S supports multiple input formats and is compatible with a range of speakers, solidifying its versatility.

Each of these Rockford Fosgate amplifiers is designed with durability, efficiency, and sound quality in mind. Their advanced technologies and user-friendly features make them ideal for any audio enthusiast looking to elevate their vehicle's sound system. With Rockford Fosgate, users can expect not only powerful amplification but also clarity and precision, ensuring an immersive auditory experience.