American Dynamics ADCC0300, ADCC0200 manual Keyboard Display, Selecting Monitors, S01 M000 C0000

Page 25

Keyboard Installation and Operation

Keyboard Display

The 16 character, two-line LCD keyboard display shows site, monitor, and camera numbers, as well as various status messages and numerical data entered by the user. The main functional areas of the LCD display are shown below.

Note: when running a tour, information about the current camera is shown on the monitor displaying the tour. Tour information is not shown on the keyboard LCD display.

Selecting Monitors

Workstation monitors display the video from the cameras and domes selected by the operator. Each monitor has an identification number documented by the system administrator.

To select a monitor:

1.Enter the monitor identification number on the numeric keypad. The number entered will appear on the left hand side of the LCD display.

2.Press the MONITOR () key. The number entered will appear on the right hand side of the top line of the LCD display.

13

S01 M000 C0000

S01 M000 C0000

Calling a Camera to View on a Monitor

After a monitor has been called to the control of the keyboard, a camera can be called to view on the monitor. Each system camera has a unique identification number documented by the system administrator.

To call a camera:

1.Enter the camera identification number on the numeric keypad. The number entered will appear on the right hand side of the top line of the LCD display.

2.Press the CAMERA () key. The camera number will appear next to the "C" on the display.

17

Image 25

Contents ControlCenterTM Copyright Radio Frequency Emissions Electrical SafetyImmunity EU Conformance StatementSécurité électrique Émission de fréquences radioImmunité Déclaration de conformité UEElektrische Sicherheit FunkfrequenzemissionenImmunität EU-KonformitätserklärungSicurezza elettrica Emissioni in radiofrequenzaImmunità Dichiarazione di conformità UESeguridad eléctrica Emisión de radiofrecuenciaInmunidad Declaración de conformidad de la UEElektrische veiligheid Radiofrequentie-emissieImmuniteit Conformiteitsverklaring van de fabrikantAbout the ADCC0200 and ADCC0300 Keyboard Programming with the ADCC0200/ADCC0300 Keyboards About the ADCC0200 and ADCC0300 Keyboard Key FeaturesADCC0200 and ADCC0300 Keyboard Overview Joystick Page Standard Matrix Operations Feature Quick ReferenceRS485 RS232 RS232 RS485 Matrix Menu OperationsDome Operations DirectSet Feature Ancillary Equipment Connection and SetupMP-KMI Keyboard Matrix Interface Installation Precautions Keyboard Installation and Operation Multiple Keyboards on an RS485 Network Default settingTerminating/Biasing the RS485 Network Multiple Keyboards on an RS232 Network User Numbers and Passcodes Basic Operations Operate Mode ADCC0200 and ADCC0300Logging On to the System Logging Off from the SystemSelecting Monitors Keyboard DisplayCalling a Camera to View on a Monitor S01 M000 C0000S01 M013 C0000 S01 M013 C0032 Controlling a Camera’s Pan, Tilt and ZoomControlling the Camera Iris Controlling Camera FocusControlling Camera Flip Auto IrisAuto Focus Calling PresetsS01 M001 C0001 Dome Camera DirectSet Running PatternsHolding a Tour Running ToursRestarting a Tour on Hold Stepping through a TourReversing a Tour Calling Salvos RS232 onlyStopping a Tour S01 M013Calling Views RS485 only Acknowledging AlarmsAuxiliaries Enabling or Disabling the Keyboard Sounder Setting the Keyboard Display ContrastViewing Satellite Sites S03 M0001 C0001Operating a VCR or Digital Recorder Cancel VCR/DVR modeLocking and Unlocking a Camera RS232 only R0021 S01 M013 C0001Initiating F1 Key Commands RS232 only Telemetry Enable/Disable RS485 onlyExiting Program Mode RS232 only Entering Program Mode RS232 onlyProgramming with the ADCC0200/ADCC0300 Keyboards S01 M0001 C0001Matrix Menu Navigating Dome Camera Menus Dome Menu FunctionsProgramming Dome Patterns Setting PresetsDefining Patterns RS485 only Clearing Patterns RS485 only Initiating F2 Key Commands RS232 onlyDefining Patterns RS232 only Clearing Patterns RS232 onlyEntering the Special Configuration Menu Installer FunctionsSetting the Keyboard Address Setting the Number of Keyboard RetriesSetting the Baud Rate Setting the Network Timeout PeriodTo Reset the Keyboard to its Factory Defaults Selecting RS485 or RS232 modeSelecting Auto Repeat or Make/Break Keypress Mode Disabling/Enabling the Sounder1234 Enter Passcode Setting the Passcode Program Lock FunctionAppendix a ADCC0200/ADCC0300 VCR Reprogramming Label Key Default CommandFollowing text should initially be shown on the teminal Monitor Arming Code Monitor Acronym Command Sequence Appendix B Monitor Arming CommandsProblem Check List Appendix C TroubleshootingAppendix D Specifications Index Keyboard Installation and Operation ADCC0200 and ADCC0300 Keyboard Installation and Operation ADCC0200 and ADCC0300 Keyboard Installation and Operation Please visit our website for more information