ADCC0200 and ADCC0300
Auto Focus
Certain cameras are designed with Auto Focus capability. The feature can be enabled from the keyboard as follows.
To enable auto focus:
1.Hold down the FUNCTION (
) key.
2.Press either the FOCUS NEAR/FOCUS FAR or OPEN IRIS/CLOSE IRIS keys.
Note: using the manual Focus FAR or Focus NEAR key will override the Auto Focus function as long as either of these keys is held down. The camera may or may not then return to auto focus mode after a time interval, or it may stay in manual focus mode. This depends on the camera under control and how the camera has been set up.
Calling Presets
A preset is a memorized location or scene that a pan/tilt camera can display on operator demand. Presets are also referred to as shots or targets. Depending on the matrix switching system used, the operator will have the option of calling a certain number of presets, each with its own unique identification number. Presets are positioned and stored in Program mode discussed in later chapters of this manual. Once they have been programmed, presets can be called to view on the selected monitor.
To call a preset:
1.After calling a pan/tilt camera to view, enter the preset identification number using the numeric keys. The number entered will appear on the right hand side of the top line of the LCD display.
2.Press the PRESET (
) key.
3.The preset number entered at step 1 will remain on the right hand side of the top line of the LCD display.
1
S01 M001 C0001
The selected video now appears on the monitor with appropriate pan, tilt, zoom, and focus adjustments.
20