Keyboard Installation and Operation
Telemetry Enable/Disable (RS485 only)
To send telemetry commands to cameras, it is necessary to enable telemetry to the selected camera. The telemetry key has a toggle action.
To enable/disable telemetry:
1.Press the TELEMETRY () key. Pressing the key again will disable telemetry.
Note it is not necessary to enable telemetry in order to use the joystick to control the movement of a camera.
Initiating F1 Key Commands (RS232 only)
The F1 key on the keyboard is a special function key which, when used with numeric keyboard inputs, accomplish special functions within a matrix system. Refer to the matrix documentation for a listing of supported commands.
To perform an F1 function key command:
1.Enter the number for the command using the numeric keys.
2.Press the F1 () key.
27