Keyboard Installation and Operation
To exit a dome camera menu:
1.Use the joystick to select QUIT WITHOUT SAVING - this will exit the dome menu without saving any changes.
2.Use the joystick to select EXIT AND SAVE CHANGES - this will save any changes and exit the dome menu.
Setting Presets
Dome, and pan/tilt cameras can be programmed with one or more preset shots.
To program a preset:
1.Call the desired camera to a monitor.
2.Maneuver the camera as required using the keyboard's joystick.
3.Press the FUNCTION (
) key.
4.Enter a number for the preset using the numeric keys.
5.Press the PRESET (
) key.
Programming Dome Patterns
Up to three patterns may be programmed for each programmable dome camera. A pattern is a predefined sequence of dome movements. The three patterns for a dome can collectively consist of up to 98 camera commands. A single pattern cannot have a duration longer than 400 seconds.
Defining Patterns (RS485 only)
To program a pattern:
1.Call the desired dome to a monitor.
2.Maneuver the camera to the position where the pattern will start using the keyboard's joystick.
3.Press the FUNCTION (
) key.
4.Enter a number (1 - 3) for the pattern using the numeric keys.
5.Press the PATTERN (
) key.
6.Maneuver the camera using the joystick to define the pattern.
7.When the pattern movements have been completed, enter the pattern number using the numeric keys.
8.Press the FUNCTION (
) key.
31