American Dynamics manual Programming with the ADCC0200/ADCC0300 Keyboards, S01 M0001 C0001

Page 36

ADCC0200 and ADCC0300

Chapter 4: Programming with the ADCC0200/ADCC0300 Keyboards

This chapter provides step-by-step instructions for programming the keyboard. Programming operations require the entry of the Program Lock passcode.

IMPORTANT NOTE

In RS232 mode, the ADCC0300 keyboard has programming functionality and is able to set presets, access matrix menus and dome configuration menus. The ADCC0200 keyboard is an operate-only keyboard in RS232 mode.

Entering Program Mode (RS232 only)

To prevent unauthorised programming of the matrix/switching system, a Program Mode lock is used. To enter Program mode the Program Lock passcode must be correctly entered.

To enter the Program Lock passcode:

1.Enter 999 using the numeric keys

2.Press the FUNCTION () key.

3.At the "Enter Passcode" prompt, use the numeric keys to enter the 4-digit passcode (1234).

4.Press the ENTER key.

The display will change showing an unlocked padlock icon indicating that Program mode is available.

Exiting Program Mode (RS232 only)

This function exits Program mode and reinstates the Program Lock passcode protection schema.

1.Enter 999 using the numeric keys

2.Press the FUNCTION () key.

S01 M0001 C0001

The padlock icon will disappear from the display indicating that Program mode is unavailable.

28

Image 36

Contents ControlCenterTM Copyright Electrical Safety Radio Frequency EmissionsImmunity EU Conformance StatementÉmission de fréquences radio Sécurité électriqueImmunité Déclaration de conformité UEFunkfrequenzemissionen Elektrische SicherheitImmunität EU-KonformitätserklärungEmissioni in radiofrequenza Sicurezza elettricaImmunità Dichiarazione di conformità UEEmisión de radiofrecuencia Seguridad eléctricaInmunidad Declaración de conformidad de la UERadiofrequentie-emissie Elektrische veiligheidImmuniteit Conformiteitsverklaring van de fabrikantAbout the ADCC0200 and ADCC0300 Keyboard Programming with the ADCC0200/ADCC0300 Keyboards Key Features About the ADCC0200 and ADCC0300 KeyboardADCC0200 and ADCC0300 Keyboard Overview Joystick Page Feature Quick Reference Standard Matrix OperationsRS485 RS232 Matrix Menu Operations RS232 RS485Dome Operations DirectSet Feature Connection and Setup Ancillary EquipmentMP-KMI Keyboard Matrix Interface Installation Precautions Keyboard Installation and Operation Default setting Multiple Keyboards on an RS485 NetworkTerminating/Biasing the RS485 Network Multiple Keyboards on an RS232 Network Basic Operations Operate Mode ADCC0200 and ADCC0300 User Numbers and PasscodesLogging On to the System Logging Off from the SystemKeyboard Display Selecting MonitorsCalling a Camera to View on a Monitor S01 M000 C0000Controlling a Camera’s Pan, Tilt and Zoom S01 M013 C0000 S01 M013 C0032Controlling Camera Focus Controlling the Camera IrisControlling Camera Flip Auto IrisCalling Presets Auto FocusS01 M001 C0001 Running Patterns Dome Camera DirectSetRunning Tours Holding a TourRestarting a Tour on Hold Stepping through a TourCalling Salvos RS232 only Reversing a TourStopping a Tour S01 M013Acknowledging Alarms Calling Views RS485 onlyAuxiliaries Setting the Keyboard Display Contrast Enabling or Disabling the Keyboard SounderViewing Satellite Sites S03 M0001 C0001Cancel VCR/DVR mode Operating a VCR or Digital RecorderLocking and Unlocking a Camera RS232 only R0021 S01 M013 C0001Telemetry Enable/Disable RS485 only Initiating F1 Key Commands RS232 onlyEntering Program Mode RS232 only Exiting Program Mode RS232 onlyProgramming with the ADCC0200/ADCC0300 Keyboards S01 M0001 C0001Matrix Menu Dome Menu Functions Navigating Dome Camera MenusSetting Presets Programming Dome PatternsDefining Patterns RS485 only Initiating F2 Key Commands RS232 only Clearing Patterns RS485 onlyDefining Patterns RS232 only Clearing Patterns RS232 onlyInstaller Functions Entering the Special Configuration MenuSetting the Keyboard Address Setting the Number of Keyboard RetriesSetting the Network Timeout Period Setting the Baud RateSelecting RS485 or RS232 mode To Reset the Keyboard to its Factory DefaultsSelecting Auto Repeat or Make/Break Keypress Mode Disabling/Enabling the SounderSetting the Passcode Program Lock Function 1234 Enter PasscodeLabel Key Default Command Appendix a ADCC0200/ADCC0300 VCR ReprogrammingFollowing text should initially be shown on the teminal Appendix B Monitor Arming Commands Monitor Arming Code Monitor Acronym Command SequenceAppendix C Troubleshooting Problem Check ListAppendix D Specifications Index Keyboard Installation and Operation ADCC0200 and ADCC0300 Keyboard Installation and Operation ADCC0200 and ADCC0300 Keyboard Installation and Operation Please visit our website for more information