American Dynamics ADCC0200, ADCC0300 manual Controlling a Camera’s Pan, Tilt and Zoom

ADCC0200 and ADCC0300

32

S01 M013 C0000

S01 M013 C0032

The selected video input will now appear on the monitor screen. After calling a camera to the selected monitor, any other camera can be called to the monitor by repeating the two steps above.

Controlling a Camera’s Pan, Tilt and Zoom

Once an appropriately equipped camera has been called to view on a monitor, the operator can manually control the camera's movement. Pan is the side-to-side movement of the camera. Tilt is the up and down movement of the camera.

The joystick controls the panning and tilting of cameras connected to the switching matrix. As the joystick is moved to the left or right, and is moved towards or away from the operator, the camera will pan and/or tilt accordingly.

For cameras with variable speed pan/tilt capability, camera movement speed is proportional to the positioning of the joystick. The further from the stationary centre position the joystick travels, the faster the camera will move.

Additionally, the ADCC0300 keyboard's 3-axis joystick can control lens zoom. Zoom refers to the apparent action of moving closer to or farther away from an object, as seen through the camera lens. For cameras equipped with an appropriate zoom lens, the zoom function can be controlled from the ADCC0300 joystick by twisting it clockwise or counterclockwise. Twisting clockwise enables the lens to zoom in. Twisting counterclockwise enables the lens to zoom out.

Center the joystick when the camera has been positioned appropriately.

ADCC0200 Joystick ADCC0300 Joystick

18