American Dynamics ADCC0200, ADCC0300 Setting the Network Timeout Period, Setting the Baud Rate

Page 42

ADCC0200 and ADCC0300

Setting the Network Timeout Period

1.Enter the Special Config menu.

2.Press the VCR SELECT () key.

3.At the "RS485 Timeout" prompt, enter the period required. The number entered is in units of 5mS e.g. entering 10 will set the timeout period to 50mS.

4.Press ENTER.

Setting the Baud Rate

1.Enter the Special Config menu.

2.Press the VCR REWIND () key.

3.At the "1=RS485 2=RS232" prompt, press 2 and then the ENTER key. It should be noted that the default is RS485.

4.The display will show:

1=1200 2=4800 0=more..

Pressing the 0 key will change the display to:

3=4800 4=9600 0=more..

Pressing the 0 key again will change the display to:

5=19200 6=38400 0=more..

Pressing the 0 key once more will change the display to:

7=57600

0=more..

5.Press the number key for the desired baud rate. For example, if the required baud rate is 19200, press the number 5 key, and then the ENTER key.

34

Image 42

Contents ControlCenterTM Copyright Immunity Electrical SafetyRadio Frequency Emissions EU Conformance StatementImmunité Émission de fréquences radioSécurité électrique Déclaration de conformité UEImmunität FunkfrequenzemissionenElektrische Sicherheit EU-KonformitätserklärungImmunità Emissioni in radiofrequenzaSicurezza elettrica Dichiarazione di conformità UEInmunidad Emisión de radiofrecuenciaSeguridad eléctrica Declaración de conformidad de la UEImmuniteit Radiofrequentie-emissieElektrische veiligheid Conformiteitsverklaring van de fabrikantAbout the ADCC0200 and ADCC0300 Keyboard Programming with the ADCC0200/ADCC0300 Keyboards Key Features About the ADCC0200 and ADCC0300 KeyboardADCC0200 and ADCC0300 Keyboard Overview Joystick Page Feature Quick Reference Standard Matrix OperationsRS485 RS232 Matrix Menu Operations RS232 RS485Dome Operations DirectSet Feature Connection and Setup Ancillary EquipmentMP-KMI Keyboard Matrix Interface Installation Precautions Keyboard Installation and Operation Default setting Multiple Keyboards on an RS485 NetworkTerminating/Biasing the RS485 Network Multiple Keyboards on an RS232 Network Logging On to the System Basic Operations Operate Mode ADCC0200 and ADCC0300User Numbers and Passcodes Logging Off from the SystemCalling a Camera to View on a Monitor Keyboard DisplaySelecting Monitors S01 M000 C0000Controlling a Camera’s Pan, Tilt and Zoom S01 M013 C0000 S01 M013 C0032Controlling Camera Flip Controlling Camera FocusControlling the Camera Iris Auto IrisCalling Presets Auto FocusS01 M001 C0001 Running Patterns Dome Camera DirectSetRestarting a Tour on Hold Running ToursHolding a Tour Stepping through a TourStopping a Tour Calling Salvos RS232 onlyReversing a Tour S01 M013Acknowledging Alarms Calling Views RS485 onlyAuxiliaries Viewing Satellite Sites Setting the Keyboard Display ContrastEnabling or Disabling the Keyboard Sounder S03 M0001 C0001Locking and Unlocking a Camera RS232 only Cancel VCR/DVR modeOperating a VCR or Digital Recorder R0021 S01 M013 C0001Telemetry Enable/Disable RS485 only Initiating F1 Key Commands RS232 onlyProgramming with the ADCC0200/ADCC0300 Keyboards Entering Program Mode RS232 onlyExiting Program Mode RS232 only S01 M0001 C0001Matrix Menu Dome Menu Functions Navigating Dome Camera MenusSetting Presets Programming Dome PatternsDefining Patterns RS485 only Defining Patterns RS232 only Initiating F2 Key Commands RS232 onlyClearing Patterns RS485 only Clearing Patterns RS232 onlySetting the Keyboard Address Installer FunctionsEntering the Special Configuration Menu Setting the Number of Keyboard RetriesSetting the Network Timeout Period Setting the Baud RateSelecting Auto Repeat or Make/Break Keypress Mode Selecting RS485 or RS232 modeTo Reset the Keyboard to its Factory Defaults Disabling/Enabling the SounderSetting the Passcode Program Lock Function 1234 Enter PasscodeLabel Key Default Command Appendix a ADCC0200/ADCC0300 VCR ReprogrammingFollowing text should initially be shown on the teminal Appendix B Monitor Arming Commands Monitor Arming Code Monitor Acronym Command SequenceAppendix C Troubleshooting Problem Check ListAppendix D Specifications Index Keyboard Installation and Operation ADCC0200 and ADCC0300 Keyboard Installation and Operation ADCC0200 and ADCC0300 Keyboard Installation and Operation Please visit our website for more information