American Power Conversion 2200 manual How to Determine On-battery Run Time

	450 VA		700 VA	1000 VA	1400 VA	2200 VA	3000 VA
Operating temperature			0 to +40 °C (+32 to +104 °F)
Storage temperature			-15 to +45 °C (+5 to +113 °F)
Operating and storage relative humidity			0 to 95%, non-condensing
Operating elevation			0 to +3,000 m (0 to +10,000 ft)
Storage elevation			0 to +15,000 m (0 to +50,000 ft)
Electromagnetic immunity		IEC 801-2 level IV, 801-3 level III, 801-4 level IV
Audible noise in dBA at 1 m (3 ft)		<45				<55
Size (H x W x D)	15.8 x 13.7 x 35.8 cm			21.6 x 17 x 43.9 cm		43.2 x 19.6 x 54.6 cm
	(6.2 x 5.4 x 14.1 in.)			(8.5 x 6.7 x 17.3 in.)		(17.0 x 7.7 x 21.5 in.)
	10.5		13.1	18.8	24.1	51	54.4
	(11.9)		(14.5)	(20.8)	(26.1)	(60)	(63.4)
Weight - net (shipping)	kg		kg	kg	kg	kg	kg
	23.2		29	41.5	53	112.3	120
	(26.2)		(32)	(46)	(57.5)	(132.3)	(140)
	lb.		lb.	lb.	lb.	lb.	lb.
Safety approvals			Listed to UL 1778, certified to CSA 107.1
EMC verification			FCC/DOC			FCC/DOC
			Class B certified			Class A certified

13. How to Determine On-battery Run Time

Knowing the on-battery run time of the unit is an important part of use, especially in situations where the protected device uses an operating system that requires some time to gracefully shut down.

1.To calculate the on-battery run time first determine the total load protected by the unit in Volt-Amps. Obtain load figures from either the labelling on the protected equipment or the accompanying literature. For loads specified in watts, multiply the specified figure by 1.4. For loads specified in Amps, multiply the specified figure by 120.

2.Add the individual loads to determine the total load.

3.Compare the total load of your system to the run time table below.

24