American Power Conversion 2200 manual User Configuration Items

14. User Configuration Items

Note: Setting these items requires optional software or hardware.

Function	Factory	User Selectable	Description
	Default	Choices
	Every 14	Every 7 days (168	Sets the interval at which the unit will
Automatic Self-Test	days (336	hours), On Startup
			execute a self-test.
	hours)	Only, No Self-Test
		Up to eight characters	Use this field to uniquely identify the
Unit ID	UPS_IDEN		unit for network management
		to define the unit.	purposes.
Date of Last Battery	Manufacture	Date of Battery	Reset this date on battery replacement.
Replacement	Date	Replacement
Minimum Capacity			The unit will charge its batteries to the
Before Return from	0 percent	15, 50, or 90 percent	specified percentage before return
Shutdown			from a shutdown.
			Set lower than normal sensitivity to
Sensitivity	Normal	Reduced, Low	avoid lowered battery capacity and
			service life in situations where the load
			can tolerate minor power disturbances.
			Sets the time before shutdown at
Duration of Low			which the unit issues a low battery
	2 minutes	5, 7, or 10 minutes	warning. Set higher than the default
Battery Warning
			only if the OS needs the time for
			graceful shutdown.
Alarm Delay After	5 second	30 second delay, At	To avoid alarms for minor power
		Low Battery
Line Fail	delay		glitches, set the alarm delay.
		Condition, No Alarm
		180, 300, or 600	Sets the interval between when the
Shutdown Delay	20 seconds		unit receives a shutdown command
		seconds
			and when shutdown occurs.
			To avoid branch circuit overload, the
Synchronized Turn-on	0 seconds	60, 180, 300 seconds	unit will wait the specified time after
Delay			the return of utility power before
			turn-on.
High Transfer Point	132 Vac	135, 138, 129 Vac
Low Transfer Point	103 Vac	100, 97, 106 Vac

26