GBC F-36 manual Part Description Recommended, Quantity

F-36 PRO Laminator Operation Manual Specifications

 	
Table 6-1: F-36 PRO Laminator Specifications
Characteristic		Specifications
Dimensions	56" x 31" x 56"
(L x D x H)	(1.42 x .79 x 1.42m)
Weight	Uncrated: 300 lbs (136 kg)
	Crated : 500 lbs (225 kg)
Laminating Rolls	42" (1.06m) roll face with high
	release surface, upper and lower
	rolls internally heated
Laminating	1.5" (3.8 cm) maximum opening
Opening	controlled with infinitely vari-
	able hand crank
Laminating	Uses heat activated and pressure-
Material	sensitive materials 0 - 39"
	(99.6 cm) wide on a 3" (7.6 cm)
	ID core, 10" (25.4 cm) maximum
	diameter
Laminating	0 to 18 fmp (o to 5.5 mpm) with
Speeds	variable speed, reversible action,
	start and stop controlled either
	through the instrument panel or
	with the variable speed foot-
	switch
Encapsulating	Pull rolls and cooling fans for
Features	uniform flat cooling
Safety Features	• Mechanical guard on infeed
	• All electrical and moving
		mechanical parts are located
		in bolted cabinets
	•	Redundant circuit protected
		safety shielding
	• Hand crank for laminating
		roll movement
	• Emergency stop buttons with
		a reset button circuit
Options	• Unwind for rolled prints
	• Rewind for rolled prints
	•	Vacuum table
	•	Outfeed Slitters
	•	Outfeed Table
Installation	220VAC 50 or 60 Hz single
Requirement	phase, 30A or, in Europe, 3
	phase, 240/400 VAC with 20A
	per phase

Table 6-2: Replacement Parts

Part	Description	Recommended
Number		Quantity
001-374	Assembly, Force	1
	Gauge PCB
001-504	Assembly, Force	1
	Sensor
001-528	Relay Board	1
001-134	Temperature Control	1
425-000	Motor	1
690-001	Roll, Main	1
690-002	Pull Roll, Upper	1
690-003	Pull Roll, Lower	1
189-000	Heater, Round	1
240-120	Thermocouple, J-	1
	type, 72"
214-000	Microswitch, Safety,	1
	Interlock
220-160	Motor Controller	1
220-110	Barrier Board, Motor	1
	Control
186-135	Fuse, Ceramic 20A	1
	(Motor Board)

© GBC Pro-Tech 1999 January 6-1