Canon MP730, MP700 manual Xvi

Page 17

NOTICE

This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.

Cet appareil est conforme aux Spécifications techniques des équipements terminaux de l’Industrie du Canada. Ceci est confirmé par le numéro d’enregistrement. L’abréviation IC précédant le numéro d’enregistrement signifie que l’enregistrement a été effectué sur la base de la Déclaration de conformité indiquant que le produit est conforme aux spécifications techniques du Canada. Ceci n’implique pas que le produit ait été approuvé par l’industrie du Canada.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

CAUTION

•Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.

IMPORTANT

•This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

•Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

The Ringer Equivalence Number (REN) for this terminal equipment is 0.3. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.

Le Nombre d’équivalence Ringer (REN) de cet appareil terminal est 0.3. Le REN attribué à chaque équipement terminal fournit une indication sur le nombre maximum de terminaux pouvant être connectés sur une interface téléphonique. La terminaison sur une interface peut consister en n’importe quelle combinaison d’appareils, à la condition seulement que la somme des Nombres d’équivalence Ringer de tous les appareils ne soit pas supérieure à 5.

CANON CANADA INC.

1-800-OK-CANON

24 HOURS A DAY, SEVEN DAYS A WEEK

http://www.canon.ca

XVI

Preface

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Quick Reference Guide Preface Trademarks CopyrightQuick Reference Guide This guide How to use the documentation providedViewing the documentation on the CD-ROM Installing the Utility SoftwareReading the documentation To not copy the documentation to your computer To copy the documentation to your computerMachine Type conventionsMachine safely, always pay attention to these warnings Contents AppendixSpecifications TroubleshootingMachine settings Location Safety informationPower Supply Handling Maintenance Power requirements Pre-installation requirements for Canon facsimile equipmentUsers in the U.S.A LocationCase of equipment malfunction Connection of the equipmentRights of the telephone company FCC NoticeUsers in Canada XVI Unpacking your machine IntroductionMulti-purpose tray Quick Reference GuideSystem requirements Main components of the machine Operation panel of the machine 5Photo Print key 4Scan key6Numeric keys @2Fax Model Redial/Pause keyIntroduction Document requirements Documents Print mediaDocuments Fax Model Using the ADF Using the platen glassLoading documents Lift the document cover Place your document face down onLoading requirements Print mediaSetting the print media size and type Setting the paper thickness leverUse 2 or 3 to select the print media size Loading print mediaPress Set Use 2 or 3 to select the print media typeDocuments and print media Computer Printing from yourPrinting documents Load paper in the printerSetting the paper type and print quality/Main tab Grayscale Printing More informationPreview before printing Print AdvisorPrinting from your computer -Basic operation Before printing from a memory card Photo printing from aMemory card Inserting a memory card Inserting/removing a memory cardMake sure the machine is on Insert a memory card into the appropriate slotRemoving a memory card Select a printing method Printing methodsUse 2 or 3 to select Index Press Set Printing an indexLoad the correct print media in the multi-purpose tray Use 2 or 3 to select ALL Frames Press Set Printing all framesPress Start Use 2 or 3 to select borderless printing Use the numeric keys to enter the frame number Printing a single frameUse 2 or 3 to select Single Frame Press Set Use 2 or 3 to view your settings in the LCD Enabling/disabling overwriting memory card data Reading data from or writing data to a memory cardMore information Photo printing from a memory card -Basic operation Copying Setting color or black & white copyingBefore copying Making copiesAdjusting the exposure density Adjusting the image quality resolutionPress Image Quality Use 2 or 3 to select the image quality Press Exposure Use 2 or 3 to select the exposure Press SetSending a fax PC FaxingClick Send Now Characters and symbols for fax numbersCharacter/symbol Explanation Before sending faxes Sending faxes from your machineLetters Number Press Set twiceMemory sending Sending methodsSpeed dialing Use 2 or 3 to select the resolutionRegistering one-touch speed dialing Use 2 or 3 to select a one-touch speed dialing key 01 toTo change or delete an entry Refer to the User’s Guide Registering coded speed dialingPress Menu Use 2 or 3 to select User Data Press Set twice Use 2 or 3 to select Coded Speed Dial Press SetCoded speed dialing Using speed dialingOne-touch speed dialing Before receiving faxes to your machine Receiving faxes to your machineReceiving faxes manually Canceling receivingScanning methods Using the Scan key on the operation panelScanning Scanning -Basic operation When to replace an ink tank MaintenanceReplacing ink tanks GuidelinesReplacing an ink tank Maintaining the printhead Flowchart of printhead maintenanceOut correctly If there is no improvementPress Menu Use 2 or 3 to select Maintenance Press Set Cleaning the printheadUse 2 or 3 to select the cleaning setting you want Printing the nozzle check patternPress T Aligning the printheadUse 2 or 3 to select Align Print Head Press Set Press Set Repeat steps 12 and 13 for column M MP Drivers/MP Toolbox Cannot install the software Troubleshooting10-1 Removal of the software was completed, but Canon remainsDevice Manager, green mark ? is displayed Windows Me Cannot use the software after upgrading to Windows XPComputer will not start Cannot print at allCannot print to a shared printer 10-3Printing stops in the middle Paper does not feed properlyPaper curls Meaningless characters and symbols are printingWhite streaks appear on the printout Printout is rubbed or stainedPaper comes out but there is nothing copied on it 10-5Is the document loaded correctly? Print the nozzle check pattern Maintaining the printhead, p10-6 Copy quality is poor or documents are printed with streaksCannot scan a document Quit other open applications and try again If an error occurs when scanning an image in PhotoshopComputer has hung up or frozen White margins appear around the scanned image See below if you are having problems receiving faxesWhite lines appear on the left side of the image Cannot scan correctly with multi-scanCannot receive a fax, cannot print a fax 10-9Repeated errors occur when you receive a fax Cannot receive a fax in ECM mode10-10Troubleshooting Cannot receive faxes automaticallyFax sent is dirty or documents are printed with streaks Cannot send a fax in ECM modeCannot send a fax Cannot dial Repeated errors occur when you send a faxTelephone disconnects during a call Memory card is not recognizedUnplug/Eject icon does not appear Windows Removable disk does not appear in Windows ExplorerWindows Explorer, you cannot display Thumbnails Windows If nothing displays in the LCD if there is no power10-14Troubleshooting Removing jammed paper If the power disconnects unexpectedlyRemoving jams in the paper output tray Removing jams from the machine’s interiorPaying attention to the following points, reload the paper Removing jammed documentsIf there are repeated paper jams Chapter Troubleshooting If the nozzle check pattern does not print properly If you cannot solve the problemInterpreting the messages LCD messagesPrinting a list to check the current settings Machine settingsAccessing the machine settings 11-1Name Description Setting Details SettingsFunction key Copy 11-2MM/DD/YYYY 11-315 SEC 11-433600bps 11-5 Switch11-6 Fax Model Menu Memory Reference Function key FaxFunction key Fax 11-7 Menu Photo Print Mode Function key Photo Print11-8 General specifications SpecificationsEnvelope printable areas Printable areasPaper printable areas Scanned area System requirements Ink specificationsBanner paper printable areas Copy specifications Print specificationsPhoto print specifications Fax Model Fax specifications Telephone specifications Scan specificationsIndex 2Index Index 4Index Limited Warranty-U.S. Only Carry-In/ Mail-In InstantExchange†Index Sending from computer problems 10-11 Index Chapter Quick Reference Guide
Related manuals
Manual 2 pages 5.42 Kb Manual 155 pages 46.57 Kb
Top Page Image Contents