2Gently gather the jammed paper to the center of the opening and then remove it.
CAUTION
•Be careful not to touch the components inside the machine.
3
4
•If the jammed paper tears while you are pulling and you cannot remove the torn pieces, turn the machine off then on with the [ON/OFF (1 sec.)] key. The jammed pieces will automatically be ejected.
Close the scanning unit until it locks into place.
Press [Resume].
•If you are printing from a Windows application, follow the instructions displayed on your computer.
If there are repeated paper jams
Paying attention to the following points, reload the paper.
1.Fan out the sheets of paper well so that they do not stick together.
2.Align the edges of the paper.
3.Adjust the paper guide correctly.
4.Make sure the paper stack does not exceed the paper limit mark (s) or tab.
5. Make sure the paper loaded does not exceed the capacity of the
6.Do not force paper into the
7.Only use the same type of paper.
8. Use recommended print media ( p.
Removing jammed documents
If documents jam in the ADF or do not feed properly, <DOC. TOO LONG> is displayed in the LCD. You do not need to turn off the power when clearing document jams.
1Press [Stop/Reset].
2If a multipage document is loaded, remove
from the ADF all pages except for the jammed page.
Chapter 10 |