Toshiba EO1-32004BE, H-9000N-US owner manual Ingredient Message

9.PROGRAMMING PROCEDURES

9.3 INGREDIENT MESSAGE

9.3INGREDIENT MESSAGE

Menu Page: 1

Item No.: 2

Ingredient messages can be printed on a label with a maximum of 54 characters per line using small letters or 32 characters per line using boldfaced small letters. Will print up to 38 lines.

<MENU>

Page 1

c

2

NEXT or

PLU

Enter the PLU#

(max. 6 dig.)

ENTER

Enter the ingredient message (Refer to Page 9-3.)

Pressing the RECEIVE key calls data stored by pressing

the SEND key.

Pressing the SEND key temporarily stores data into the work buffer.

c

ENTER	PROG.
	TEST
	ESC.

Sorting

◇ Y

Any key

except Y Not Sorting

The memory file is sorted when a memory full error occurs.

<MENU>

Page 1

Main

<MENU>

NOTES: 1. When no data is programmed for the PLU, ingredient cannot be set.

2.When a selected PLU is not stored in the PLU file, a “PLU NOT FOUND” error occurs.

3.Once you exit this menu and enter again, data stored in the work buffer is cleared.

4.When there is no area to store ingredient data, a “MEMORY FULL” error occurs.

5.Different PLUs cannot use same the ingredient data. (PLU and ingredient data are in pairs.)

9- 7