Toshiba EO1-32004BE, H-9000N-US owner manual LON System

Page 46

9.PROGRAMMING PROCEDURES

9.15 LON SYSTEM

9.15LON SYSTEM

Menu Page: 2

Item No.: 4

The H-9000 Printers which consists of a master, satellites, and a backup master are connected each other by the LON cable to transmit data such as PLU, ING., NUTRI, etc.

ID# 1 is reserved for the master terminal.

ID# 2 is reserved for the backup master terminal or satellite terminal. ID# 3 to 32 are for satellite terminals.

Setting numbers other than the above results in an error.

m

<MENU>

Page 2

4

CHANGE

PLU

◇

IN-LINE ↔ OFF-LINE

ID #

ENTER

ID#: 1

Set the number of scales in the system.

ENTER

DLL? Yes n

No

p

PROG.

<MENU>

Page 2

ESC.

m

Main

<MENU>

NOTES: 1. Before starting the above procedure, press the key and enter IN-LINE mode.

2.When installing the backup master terminal, set the master scale’s initial status of #9-1 to 1.

3.Set ID # to all scales connected by LON cable.

4.When the display power is turned on, a satellite terminal is ready to receive data from the master terminal.

5.After setting the ID #, turn the power switch OFF and ON again.

9- 24

Image 46

Contents 9000N-US Page Safety Summary Precautions Table of Contents Issuing Labels with NET Weight Statement ･･････････････ Programmed Data Verification Reports ･･････････････････････Introduction Applicable Model Accessories∙ H-9000-N-US Description of the model number is as follows Specification PrinterSTLAN-2P OptionLON TmccAppearance DisplayProgramming Keyboard KEY LayoutProgramming Keyboard Function Send SpaceProg Operation Keyboard Function Operation Keyboard and Speed KeyboardPLU DT/TM PRTFor VoidSelf Service Keyboard ZeroKEY Layout Procedure Before Operation Speed KEY SETRemoval and Replacement of Media Removal and Replacement of Media Power Outline of Operation1/4LB KEY 100g, kg KEY LB/kg KEY Registration modeXNOT Available Tmcc CMT-port communicarion Clerk LabelProgramming Procedures How to access the Programming MenuTitle and Contents of Programming Menu How to enter characters TEC StorePLU Data Edit MenuPLU Data Setting For the UPC#Auto Code Ingredient Message Nutrition Setting When entering PLU#, be careful of the following Daily Value Max digits Contents of Daily value Set the Daily Value TableDeleting Nutrition Data Memory file is sorted when a memory full error occursMemory file sort PLU Verifying Label Menu Item No Verifies PLU data stored in the scaleAddress and Commercial Message Setting Combination Message Message construction Message display timeThank YOU Call Scrolling Flashing Curtaining Scrolling up Scrolling downThank YOU Thank YOU ANK YOU Call AGASpecial Information Grade LineDepartment Number Speed KEY SettingSetting Department/Vendor Number Vendor NumberPrint Format By pressing KeyLabel Format Number Table Format NoMenu Item No DATE/TIME SettingCMT Operations PL-3 Operation Error code during PL-3 operationNumber of the data disc by using the rotary switch Program the fileItem # Transmission Item ListCMT Transmission Delay Time Table IN-LINE/LOCALLON System Price Cancel RetryData Transmission Initial #0 #19① Weigh or Fix Price Format Default Bar Code FormatBAR Code Format ② By Count FormatFlag PLU # UPC # PC/D Price Weight PLU # UPC # PC/DTitles Transferring Logo Data Verify H-9000=CMTIdiom Setting Error message during data transmissionVendor Setting Key functions Free Format SettingEnter SP-INFO/NET WT Logo Frequent Shopper Print coordinate Programmed Data Verification Reports How to access Report menuMenu Set the zone PLU #. Ex. PLU #100 ～108 R S Password SecuritySetting Password and Protect Menu R S X Z× ー × Calling Menu by Entering Password Operating Procedures How to access REG., M.DOWN, or Rewrap menuMenu REG., M.DOWN, or Rewrap Mode Weigh Weighing OperationFIX Price Operation By Count Operation REG. MANU. BY-COUNT DonutsFor Print Count Operation To check the remaining number, clear the PLU and press KeyExample B When operating in Fix or By Count mode Set the number of labels. Max labels Enter the PLU # Issuing Labels with NET Weight Statement PLUSample label 12-10 TARE/SAVE Function Procedures PlatterCalling and Printing Grade Lines Calling and Printing Logos LogoMenu REG, M.DOWN, or Rewrap Mode WEIGH, FIX, or by Count Selecting Print ItemDate Change Batch Print Mode with 30 Items Run Assignment Unit Price Change and G.Line/LOGO Call Label Issue Stop or Cancel Visual Commodity Library Dpt #Floating Vendor Price deletion SubtotalHow to access Read or Reset menu Total OperationPLU Total Report Hourly Total ReportGrand Total Report Ex. Report MenuVendor Total Report For Enter PLU TotalError Message Table Programming ModeLabel lssue Mode Report and Reset ModeLON System Mode Cleaning the Print Head Troubleshooting Before You Call for ServicePage