Toshiba EO1-32004BE, H-9000N-US owner manual Transmission Item List, Item #, Cmt

9. ROGRAMMING PROCEDURES

9.13 CMT/PL-3

■ Table 4: Transmission Item List

ITEM #	Title on the Display		Contents of Transmission	CMT	PL-3
2	VERIFY PLU & ING. = CMT 2		COMPARE PLU & ING. IN OLD FORMAT	○	○
3	READ PLU & ING. FM CMT 3		READ PLU & ING. IN OLD FORMAT	○	○
4	WRITE PLU TO CMT	4	SAVE PLU IN NEW FORMAT	○	○
5	VERIFY PLU = CMT	5	COMPARE PLU IN NEW FORMAT	○	○
6	READ PLU FROM CMT	6	READ PLU IN NEW FORMAT	○	○
7	WRITE ING. TO CMT	7	SAVE ING. IN NEW FORMAT	×	○
8	VERIFY ING. = CMT	8	COMPARE ING. IN NEW FORMAT	×	○
9	READ ING. FROM CMT	9	READ ING. IN NEW FORMAT	×	○
10	WRITE NUTRI. TO CMT	10	SAVE NUTRITION IN NEW FORMAT	○	○
11	VERIFY NUTRI. = CMT	11	COMPARE NUTRITION IN NEW FORMAT	○	○
12	READ NUTRI. FM CMT	12	READ NUTRITION IN NEW FORMAT	○	○
13	WRITE SPEED KEY	13	SAVE SPEED KEY IN NEW FORMAT	○	○
14	VERIFY SPEED KEY	14	COMPARE SPEED KEY IN NEW FORMAT	○	○
15	READ SPEED KEY	15	READ SPEED KEY IN NEW FORMAT	○	○

○: operable, ×: inoperable

NOTE: When the PL-3 is connected, more than one FDK may be required depending on the amount of ING. data.

Be careful of the following when changing a FDK.

a:During the write operation, replace with a formatted FDK.

b:Verify and read data in same order as the write.

To cancel to change a FDK, press the CLEAR key.

9- 22