Toshiba B-852-TS12-QQ owner manual Stock Tab

3. PRINTER OPERATION EO1-33029

3.4 Using the B-852 Printer Properties Menus

3.4.7 Bar Fonts Tab (Cont.)

NOTE:

Pressing the Help button on the Bar Code Font property page will access additional informa- tion concerning each of the above bar font properties.

3.4.8 Stock Tab

∙Symbol Type. Used to specify the type and level of error correction to use. (Used with Data Matrix only.)

∙Character Set. Used to specify the allowable characters for data. (Used with Data Matrix only.)

∙Use Prefix. Used to add a prefix to a bar code. (Used with Data Matrix only.)

∙Shape. Used to specify whether the bar code will print in the shape of a square or a rectangle. (Used with Data Matrix only.)

∙White on Black. Used to reverse the bar code so that it prints white on a black background. (Used with Data Matrix only.)

∙Mode. Used to specify one of the different modes MaxiCode supports. (Used with MaxiCode only.)

∙Zipper Block. Used to specify whether or not a MaxiCode zipper block will print with the bar code. (Used with MaxiCode only.)

∙Contrast Block. Used to specify whether or not a MaxiCode contrast block will print with the bar code. (Used with MaxiCode only.)

Stock Properties, one of the most important property setting pages. This page allows the selection of media settings (Ribbon use, sensor type, and label gap length), issue settings (batch or strip mode, cutter use, and print speed), as well as fine adjustments (feed length, backfeed length, cut strip position, and print shrinkage).

After pressing the Stock button, the following screen display will appear.

3-24