Toshiba B-852-TS12-QQ owner manual Feed Length Fine Adjustment, Restart Feed

APPENDIX 4 SYSTEM MODE

EO1-33029

A4.4 Printer Parameter Fine Adjustment

A4.4 Printer Parameter Fine Adjustment (Cont.)

NOTES:

∙ When pressing the [FEED]

and [RESTART] keys at the

same time in the parameter

setting, the message returns

to “<3>ADJUST SET”.

∙ If holding the [FEED] or

[RESTART] key for 0.5

seconds or longer in the

Printer Parameter Fine

Adjustment, the key is

entered continuously.

∙ A changed parameter

becomes enabled by pressing

While pressing the [FEED] and [PAUSE] keys at the same time, turn on the printer. Holder both keys until the “<1>DIAG. Vx.x” Message appears.

￿￿!',$*￿￿￿￿9[￿[￿

Press the [FEED] key.

The printer is at the start of the Printer Parameter Fine Adjustment menu.

￿￿!$'-867￿6(7￿

Feed Length Fine Adjustment

With this parameter you can fine adjust the feed length. When “<3>ADJUST SET” appears, press the [PAUSE] key.

)(('￿$'-￿￿￿￿￿￿PP￿

the [PAUSE] key and is

stored in memory until the

printer is turned off.

∙ Use the [FEED] or

[RESTART] key to select a

desired value or option.

Feed Length Fine Adjustment (Example)

[RESTART]

[FEED]

)(('￿$'-￿￿￿￿￿￿PP￿

)(('￿$'-￿￿￿￿￿￿PP￿

)(('￿$'-￿￿￿￿￿PP￿

)(('￿$'-￿￿￿￿￿￿PP￿ )(('￿$'-￿￿￿￿￿￿PP￿

NOTE:

The fine adjustment value equals the sum of the fine adjustment values set by the PC command and this parameter. The maximum feed length fine adjustment value is ±50.0mm. When the value reaches the maximum, the value remains unchanged even if the subsequent fine adjustment is performed.

[FEED] key: Pressing the [FEED] key one time causes a –0.5mm change, up to –50.0 mm.

[RESTART] key: Pressing the [RESTART] key one time causes a +0.5mm change, up to +50.0 mm.

After completing the fine adjustment, press the [PAUSE] key.

A4- 6