Toshiba 1000 user manual User’s Guide to Operations, UPS Startup and Shutdown Starting the UPS

Page 46

7. User’s Guide to Operations

Normal ongoing UPS operation requires little or no user input. Startup and shutdown requirements of the user are discussed in this section.

7.1UPS Startup and Shutdown Starting the UPS

Ensure that installation is correct and that the input power cable is connected to a properly grounded outlet.

Start the UPS by pressing the On/Off button on the front panel.

The UPS will start the inspection of internal functions, main synchronization, and inverter startup. A successful completion allows for output power via the outlets.

During the startup inspection the LCD will display Ready On. The LED will light up when output power has started and the LCD display will show Line Mode.

Apply power to the load.

Shutting Down the UPS

Shut off and disconnect the load.

Press and hold the UPS On/Off button for five seconds. The alarm will sound and the UPS will shut down.

The LCD will momentarily display UPS OFF.

Note: In emergency situations the EPO should be used.

7.2Button Operation

1. ” or ON/OFF is the UPS ON/OFF button.

(a)Press and hold the ON/OFF button for at least 3 seconds to turn on the UPS.

(b)When the UPS is operating, press and hold the Load ON/OFF button for at least 3 seconds to turn off the UPS.

21

Image 46
Contents 1000 &1000+ Series Important Notice Uninterruptible Power System Table of Contents Limitations and Exclusions Manual’s Purpose and Scope Page VII FCC Part EMC StatementsICES-003 Declaration of Conformity Request General Safety Instructions Safety Alert Symbol / Signal WordsPage Special Symbols Important Safety Instructions Qualified Personnel only Qualified Personnel shallPage XVI Instructions Importantes Concernant LA Sécurité Conserver CES InstructionsInspection/Storage/Disposal Storage Maintenance DisposalInstallation Precautions Conductor Routing and Grounding Operating Precautions Maintenance Note Xxiv Introduction System DescriptionGeneral Description Efficiency Optimizer Function Diagnostic Tests Free Run ModeAuto-Restart System Configuration Storage ShippingPage Environment InstallationUPS Frequency Converter Option Rear Panel Views 1000VA 1500VA Tower Rear Panel 2000VA 3000VA Tower Rear Panel2400VA Tower Rear Panel 2400VA Power Wiring Options X1-N or N-X3 120V Half Load1000 1500 VA Rack mount 2U Rear Panel 2000 3000 VA Rack mount 2U Rear PanelVA Rack mount UPS 3U, Battery Pack 3U Rear Panel Example of Installation of Plug & Play products 2400 VA6000 VA Front Panel Settings HE Mode SET ON/OFFOutlet GROUP1/GROUP2 Computer and Alarm Connections RS-232 Standard Interface PortDB9 Male Connector Outline Facing connector Dry Contact Interface optional cardNetwork Transient Protector EPO Port emergency power offUSB Port Load SegmentsShutting Down the UPS User’s Guide to OperationsUPS Startup and Shutdown Starting the UPS Button OperationControl Panel Functions Control panels 1000/1500/2000/3000VA Normal DisplayUPS Meters Display UPS ConfigurationsLCD Message Description Page UPS Manual Test Audible AlarmsSilencing an Alarm Interpreting UPS MessagesTroubleshooting Alarm Description What You Should DoMaintenance Battery ServicingTechnical Specifications Power Range 1000-3000 VA 120Power Range 2400 VA 208/240 Power Range 6000 VA 208/240 Rackmount US 208/240V UT1G1G060C6RKB3 + UT1-BR-0607 GeneralEnvironment Power Range 1000-3000 VA 230 RKB2Backup Time at Partial Loads Warranty Information Uninterruptible Power SystemLimitations and Exclusions Modifications
Related manuals
Manual 54 pages 29.07 Kb Manual 2 pages 33.02 Kb