9. Technical Specifications
9.1Power Range 1000-3000 VA (120 V)
Tower | US 120V Model | UT1A1A010C6 | UT1A1A015C6 |
| UT1A1A020C6 | UT1A1A030C6 |
Rack- | US 120V Model | UT1A1A010C6R | UT1A1A015C6R |
| UT1A1A020C6R | UT1A1A030C6R |
mount (2U) |
| KB2 | KB2 |
| KB2 | KB2 |
Input | Voltage |
| 120 VAC (80 – 144 V) |
| ||
| Voltage Range |
| +20% to |
| ||
| Frequency |
| 50 / 60 Hz auto sensing |
| ||
| Power Factor |
| Greater than 0.97 |
| ||
| Topology | True | ||||
Output | Voltage |
| 120 VAC |
| ||
| Capacity (VA) | 1000 VA | 1500 VA |
| 2000 VA | 3000 VA |
| Capacity (W) | 700 W | 1050 W |
| 1400 W | 2100 W |
| Frequency |
| 50 / 60 Hz auto | sensing * |
| |
| Wave Form |
| Sine wave, zero transfer time |
| ||
| Load Power |
| 0.70 |
|
| |
| Factor |
|
|
|
|
|
| Efficiency |
| Greater than 86% |
| Greater than | |
| AC/DC/AC |
|
|
|
| 85% |
| Rated Current | 8.3 A | 12.5 A |
| 16.6 A | 25 A |
| Overload | 125% for 1 min 150% for 10 sec | 125% for 1 min | |||
| Capacity |
|
|
|
| 130% for 10 |
|
|
|
|
|
| sec |
| Crest Factor |
| 3.0 at full load |
| 2.5 at full load | |
Battery | DC Voltage | 36 V / 12 V |
| 72V / 12 V | ||
| (Tower & 2U) | 9 AH x 3 |
| 9 AH x 6 | ||
| Backup Time | 7 min | 6 min |
| 6 min | 5 min |
| (Tower & 2U) | (full load) | (full load) |
| (full load) | (full load) |
| Interface | |||||
Physical | Dimensions | 16.5”L x 6.0”W x 9.4”H |
| 16.7"L x 8.9"W x 14.2"H | ||
| (Tower) |
|
|
|
|
|
| Dimensions | 16.7”L x 16.9”W x 3.5”H |
| 25.0"L x 16.9"W x 3.5"H | ||
| (2U) |
|
|
|
|
|
| Weight | 35.6 lbs / | 37.4 lbs / |
| 68.4 lbs / | 72.6 lbs / |
| (Tower/2U) | 37.6 lbs | 37.6 lbs |
| 69.5 lbs | 71.5 lbs |
| Line Cord | 5- | 15P |
| ||
| Receptacles | NEMA 5 - 15 P (6 / 6) |
| Tower - NEMA | ||
| (Tower/2U) |
|
|
| 2U - NEMA | |
Operating |
| 32 – 104°F (0 – 40°C) |
| |||
| Temperature |
|
|
|
|
|
| Altitude |
| 11500 ft (3500 m) above sea level |
| ||
Warranty |
| Three years on electronics |
|
| ||
|
| Two years full replacement on battery (See Toshiba warranty policy for full | ||||
|
| details.) |
|
|
|
|
•Output frequency can hard set at 50 or 60 Hz by installing an optional software upgrade. This upgrade enables the user
to select a fixed output frequency and simultaneously disables the bypass mode.
Standards -
29