Toshiba GD-1260, GD-1250, GD-1270 manual TX Type, Exposure, Tti, Rti, Ecm

Page 102

6 SETTING ITEMS

TX TYPE

Set the fax transmission mode.

MEMORY TX:	Send the original after the scanned data are saved in the memory. Up to 100 transmissions can
	be reserved. Up to 1000 pages can be sent in one transmission.
DIRECT TX:	Send the original directly as it is being scanned. Once a page has been scanned and sent, the
	next page is scanned and sent. Therefore, it takes longer to scan and send all pages. However,
	you can confirm on the fly that each page is sent to the recipient.

EXPOSURE

Set the density at which the original is to be scanned.

AUTO:	This equipment automatically detects the contrast of the original, and scans it with the optimum
	contrast.
MANUAL:	Press	or	to set the desired contrast.

TTI

Switch the TTI recording ON or OFF. To enable this feature, the Terminal ID must be registered to this equipment in advance.

P.103 “Registering the terminal ID”

Setting this item may not be required since it may not be displayed on the screen (it depends on your country or region).

RTI

Switch the RTI recording ON or OFF. To enable this feature, the Terminal ID must be registered to this equipment in advance.

P.103 “Registering the terminal ID”

ECM

Switch the ECM (Error Correction Mode) communication ON or OFF.

ECM is an internationally standardized communication mode that automatically corrects errors that occur during fax transmissions. With this setting option ON, even when the transmitted data have been affected by noise during communication, this mode allows good communication without image distortion by automatically resending the part that have been affected.

yBoth the sender and the receiver must have the ECM function to make ECM communication available.

yWhen affected by noise during communication, communication time is slightly longer than usual. Even when the ECM communication is used, an error may occur depending on the line status.

yThe ECM communication is not available for voice communication.

100 User Settings

Image 102

Contents Operator’s Manual for FAX Unit Page Preface PrefaceToshiba America Business SOLUTIONS, INC For U.S.A. onlyFor Canada only Toshiba of Canada Limited Toshiba Australia PTY Limited‰ Model and series names in this manual „ How to read this manual ‰ Symbols in this manualBefore Reading This Manual ‰ Explanation for control panel and touch panel„ Accessories ‰ Description of original/paper direction‰ Trademarks General Precautions „ When power failure occurs„ Disclaimer notice Page Contents 114 101112 115Connecting Cables Description of Each ComponentDescription of Each Component „ Control panelSTUDIO6530C Series GD-1270 FAX button Memory RX„ Touch panel Header area„ Options FAX UnitConnecting Cables STUDIO855 Series GD-1250 LinePage Sending a Fax Receiving a FaxPlace the originals „ Basic proceduresSending a Fax Press the FAX button on the control panelSpecify the recipient Press SendRedial function Batch transmission functionSending the next original „ Handling an original ‰ Originals that can be sent ‰ Original scanning range‰ Placing the originals on the original glass Lower the Original Cover or Radf slowly‰ Placing the originals on the Radf Precautions for using the Radf Sending different width originals„ Setting the transmission conditions ‰ Making settingsResolution ECM ‰ Changing the settings for each „ Specifying the recipient ‰ Direct entry with digital keys‰ Specifying the recipient in the address book ‰ Group entry Then press OK ‰ Searching for by ID numberPress Known ID Entered ID number is displayed. Press FAX icon‰ Searching for the recipients fax number Press SearchSearch ‰ Confirming the recipients „ Other transmissions ‰ On-hook transmission Specify the recipients‰ Off-hook transmission Pick up the handset of the external telephoneReplace the handset of the external telephone ‰ Auto reception „ Reception modeReceiving a Fax ‰ Manual reception‰ Memory reception ‰ Default setting for RX printing „ Originals and paper ‰ Acceptable size of paper‰ Paper priority when there is no same size paper North American formatFormat A3 B4Canceling the Transmission Checking CommunicationsChecking Communications „ Checking reserved transmissionsPress JOB Status Select FAX „ Checking communication status log List of the communication status is displayed Registering recipients’ fax numbers to the address book‰ When using the original glass Canceling the Transmission„ Canceling the memory transmission Press JOB Cancel‰ When using the Radf Reversing Automatic Document Feeder „ Canceling direct transmissions „ Canceling reserved transmissions Press JOB STATUS, and then select the FAX tabAdvanced Functions Mailbox TransmissionTransmitting 2-Sided Originals Place the originals on the RadfPress Send Priority Transmission Polling Communication „ Polling transmissionPress the Start button on the control panel „ Polling reception Press the Advanced tab, and then press PollingSpecify the sender’s fax number Bulletin board mailbox Mailbox TransmissionConfidential mailbox Relay station mailbox„ Registering/printing/deleting an original ‰ Registering an originalPress the Start button on the control panel ‰ Printing an original ‰ Deleting an original „ Sending/retrieving an original ‰ Sending an originalSpecify the recipient’s fax number ‰ Retrieving an original Specify the recipients fax number Press Send„ Creating/modifying/deleting a mailbox ‰ Creating the confidential or bulletin board mailboxMailbox Transmission ‰ Creating/modifying a relay station mailbox MODIFY, and then OKMailbox Transmission Mailbox Transmission ‰ Deleting a mailbox Confirmation screen for the deletion is displayed. Press YES Chain Dial Communication Delayed Transmission Reservation Recovery Transmission Onramp Gateway StudioSetting up the Smtp server Offramp GatewaySpecifying an E-mail address Save as File Press Send Page Printing Lists & Reports Manually Printing Lists & Reports Automatically Lists/Reports SamplesPrinting Lists & Reports Manually „ Journal transmission journal/reception journal„ Reservation list Press Journal„ Mailbox/relay box report Press the Advanced tab, and then press ITU Mailbox ListPrinting Lists & Reports Automatically Transmission JournalLists/Reports Samples „ Transmission journal„ Reception journal PGS „ Memory transmission report „ Transmission report „ Multi transmission report„ Multi polling report „ Relay TX orig. terminal report„ Relay TX relay station report „ Relay TX end terminal report„ Relay station report „ Mailbox reception report„ Power failure list Setting Items Administrator Settings 101User Settings „ Fax settingsSet each setting item, and then press OK ResolutionOriginal TTI TX TypeExposure RTIAdministrator Settings FAX menu is displayed Following section describes each menu Press Terminal ID Set each setting option, and then press OK „ Registering the terminal ID„ Setting the initial setup Press Initial SetupExample of how sender information is printed on paper Set each option, and then press OK RX ModeMonitor Volume / Completion Tone Volume Dial Type / Dial Type LINE2Discard „ Setting RX printingPress RX Print Set each option, and then press OK ReductionDuplex Print Rotate Sort„ Setting recovery transmission TX/RX „ Setting 2nd Line for FAX UnitRX only Timer RX only 24HRPage Troubleshooting 112 Specifications of GD-1250/GD-1270 114Troubleshooting „ Error codes„ Error messages „ Transmission/reception trouble Transmission troublesReception troubles Specifications of GD-1250/GD-1270 LD, LG, LT, LT-R, ST, ST-R, CompIndex Numerics100 Page Multifunctional Digital Systems

Related manuals

Manual 94 pages 46.57 Kb

Manual 90 pages 1.91 Kb