![](/images/new-backgrounds/1119894/11989441x1.webp)
If this equipment is not properly connected in your network, the message that the installer cannot discover this equipment is displayed. Click [Retry] to search again. Click [Con- tinue] to configure a local port.
Select “Local Port” to configure a local port, and then select in the drop down box the desired port configured previously. If a local port is not configured previously, select any port in the drop down box as a temporary port so that you can continue the installation. Then click [Next].
If you selected a temporary port in the step above, you need to configure a correct port after installation. See “Note” in step 11.
9 Click [Next].
If you want to change the program folder, rename the folder in the “Program Folder” field.
The Start Copying Files screen is displayed.
Installing Network Fax Software 19