INITIAL SETTINGS
SETTING THE NUMBER OF RINGS FOR AUTO RECEPTION
You can set the number of rings before the machine answers in AUTO mode following the procedure below.
1 Press the [MENU] key. | 6 Press the [MENU] key. |
2 Press the [] key () or [] key () until "4:USER PROGRAM" appears, and then press the [ENTER] key.
Press the [MENU] key to exit.
If an external telephone is connected, the Note external telephone will ring one time when
auto reception is set to 0 rings.
Selection
"4:USER PROGRAM"
3 Press the [] key () or [] key () until "4:# OF RINGS (AUTO)" appears, and then press the [ENTER] key.
Selection
"4:# OF RINGS (AUTO)"
4 Press a numeric key to select the number of rings.
Select the number of rings you would like to use (0 to 9).
5 Press the [ENTER] key.
28