TIMER OPERATIONS
The timer function allows you to set a transmission or polling operation to be performed automatically at a time you specify. Up to five transmission operations or polling operations can be set at any one time, and the times they will be performed can be specified up to a week in advance.
You can use this function, for example, to take advantage of lower night time telephone rates without having to be there when the operation is performed.
●For a timer transmission, scan the original into memory when you set the transmission. Scanning the original into memory is convenient because you do not have to worry about original
●If the memory becomes full while the original is being scanned, "MEMORY FULL" will appear in the display.
•Press the [START] key ( ) to transmit the pages that have been stored up to that point in memory.
•Press the [CLEAR ALL] key () to cancel the entire transmission.
Your fax machine | Recipient |
•Select the recipient
•Select transmission settings
beep
The scheduled time arrives
| Transmission |
Transmission begins | /reception |
|
Setting up a timer transmission job:
1 | Press the [MENU] key. |
| 4 | Enter the time at which transmission | 5 |
|
|
|
| will take place with the numeric keys. | |
|
|
|
Enter two digits for the hour and two digits for the minute.
2 Press the [] key () or [] key () until "1:TIMER MODE" appears, and then press the [ENTER] key.
Selection
"1:TIMER MODE"
3 Press the [] key () or [] key () to select "1:SET".
Selection
"1:SET"
To cancel a timer operation, select "2:CLEAR".
5 Press the [] key () or [] key () to select "AM" or "PM" and press the [ENTER] key.
79