1 Mobile Broadband card 2 antenna wires (2)
a.Disconnect the Mobile Broadband card from any attached cables.
1 Mobile Broadband card 2 metal securing tabs (2)
NOTICE: To prevent damage to the connector, do not use tools to spread the securing clips.
b.Use your fingertips to carefully spread apart the metal securing tabs until the card pops up slightly.
c.Slide and lift the Mobile Broadband card out of its connector.
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
NOTE: Do not insert a WLAN card into the Mobile Broadband card slot.
NOTICE: The Mobile Broadband card may have one or two connectors, depending on the type of card you ordered.
2.To install a Mobile Broadband card:
a. Move any antenna cables out of the way to make space for the card.
NOTICE: To avoid damaging the Mobile Broadband card, never place cables on top of or under the card and ensure that you route the cables properly.
NOTE: Cable routing for the Mobile Broadband card may vary.
b.Align the card with the connector at a