IEEE 1394 Connector — Connects devices supporting IEEE 1394
NOTE: The D420 has been optimally designed to be used with the slim Media Base for docking. However, it is compatible with the
infrared sensor — Lets you transfer files from your computer to another
When you receive your computer, the infrared sensor is disabled. You can use the system setup program (see System Setup Program) to enable the infrared sensor. For information on transferring data, see Windows Help, the Help and Support Center, or the documentation that came with your
The AC adapter converts AC power to the DC power required by the computer. You can connect the AC adapter with your computer turned either on or off.
CAUTION: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage.
NOTICE: When you disconnect the AC adapter cable from the computer, grasp the connector, not the cable itself, and pull firmly but gently to avoid damaging the cable.
air vents — The computer uses an internal fan to create airflow through the vents, which prevents the computer from overheating.
NOTE: The computer turns on the fan when the computer gets hot. Fan noise is normal and does not indicate a problem with the fan or the computer.
Bottom View
CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your computer in a
1 | battery | 3 | 5 | air vent | |
|
|
|
|
|
|
2 | battery charge gauge | 4 | memory module/WLAN | 6 | docking device slot |
|
|
|
|
|
|