Airlink101 AR570W user manual Setup Wizard, Current Time, Enable NTP Update, Time Zone

Page 19

3.0 Setup Wizard

Click on Setup Wizard and start the basic configuration for this router. If you have gone through the EZ Setup Wizard on the provided CD, you do not need to set up the router again.

Step 1 Configure the Time Zone Settings of the Router. You can click on Copy Time from PC. Enable Daylight Saving if it is applicable in your country. Click NEXT.

The Time Zone allows your router to base its time on the settings configured here, this will affect functions such as Log entries and Firewall settings.

Parameter

Description

Current Time

Display the router’s current time. You can manually configure it

 

or Click on Copy Time from PC.

Enable NTP Update

Check to enable time auto-synchronization through Internet.

Time Zone

You can select your local time zone here. The router will sync

 

time according to your time zone selection.

20

Image 19
Contents Wireless N 150 Router Federal Communication Commission Interference Statement Table of Contents Troubleshooting Technical Support Package Contents FeaturesRouter Interface Back Panel WPS Using EZ Setup Wizard Installing the RouterPage Page Dynamic IP Cable Modem users Page Page Congratulations! Your router configuration has been finished Connecting to the Router Wirelessly Page Using Web Configuration Utility Page Time Zone Setup WizardEnable NTP Update Current TimeMAC Address Time Server AddressDaylight Savings Host NameSecondary DNS Primary DNSUser Name Idle Time Out PasswordService Name Connection TypePptp Gateway PptpBEZEQ-ISRAEL Connection IDUser Name Please input user name assigned by Telstra L2TP GatewayParameterDescription Associated Clients Channel NumberWPA2Mixed Page 1 WAN Network2 LAN Dhcp Server IP addressSubnet Mask 802.1d Spanning TreeDhcp Client End IP Enable Static Dhcp LeasesLease Time Dhcp Client Start IPNAT / Static Routing Destination LAN IP Enable Static RoutingDefault Gateway ResetDdns Reset You can also click ‘Reset’ button unselect allDynamic DNS Provider Password/KeyAccount Basic Settings WirelessBand Show Active Clients Wireless SecurityEncryption Enable 802.1x AuthenticationSee 3.2.2.1 to 3.2.2.3 for each encryption type Encryption Key 1~4 Default Tx KeyKey Length Key FormatPre-shared Key Format WPA Unicast Cipher SuitePre-shared Key Radius Server Port Radius Server PasswordMAC Control Radius Server IP AddressComment Enable MAC ControlClear Fragment Threshold Advanced SettingsDtim Period Tx PowerRTS Threshold Beacon Interval5 WPS Page Wi-Fi Protected Setup Information Enable WPSConfig Mode Configure by Pin Code Configure by Push ButtonVirtual Server Port Forwarding Application & GamingPublic Port Special Applications Port TriggeringCurrent Virtual Server Table Add in red box Enable Special ApplicationsTCP/UDP Port to Open Popular Application3 DMZ Current DMZ Table Enable DMZPublic IP Client PC IP addressReset You can also click ‘Reset’ button to unselect all ALG Settings5 QoS Current QoS Table Enable QoSTotal Download Bandwidth Total Upload BandwidthLocal Port Range Rule NameBandwidth Local IP AddressProtocol Deny/Allow Access RestrictionsEnable IP & Port Filtering 1 IP & Port FilteringClient PC Description Client ServicePort Range MAC Filtering Current MAC Filtering Table Enable MAC Filtering3 URL/Keyword Filtering Client PC MAC AddressURL/Keyword Enable URL FilteringCurrent URL Blocking Table Firewall SecurityDoS Denial-of-Service Ping of Death L2TP pass through VPN Pass throughIPsec pass through Pptp pass throughTime AdministrationManagement Current PasswordNew Password Confirmed PasswordReset Reboot Remote Management Firmware Upgrade Restore to Factory Default Configuration SettingsBackup Settings Restore SettingsSave 6 LogRefresh Statistics LAN Status Wlan Wireless LAN StatusStatus Internet Connection StatusSystem Status Troubleshooting Technical Support