Parameter | Description |
Enable QoS | Check this box to enable QoS, and uncheck this box to disable |
| QoS. |
Total Download Bandwidth | You can set the limit of total download bandwidth in kbits. To |
| disable download bandwidth limitation, input 0 here. |
Total Upload Bandwidth | You can set the limit of total upload bandwidth in kbits. To |
| disable upload bandwidth limitation, input 0 here. |
Current QoS Table | From the table, you can check each QoS rule setting. |
Add | Click “Add” button to add a new QoS rule, see section 3.3.5.1 |
| “Add a new QoS rule” below. |
Edit | If you want to modify the content of a specific rule, please check |
| its “Select” box, then click “Edit” button. Only one rule should be |
| selected a time! If you didn’t select a rule before clicking “Edit” |
| button, you’ll be prompted to add a new rule. |
Delete | If you want to delete a setting, check the ‘select’ box of the |
| setting you want to delete, then click ‘Delete’ button. (You can |
| select more than one setting). |
Delete All | If you want to delete all settings listed here, please click ‘Delete |
| All’ button. |
Move Up | You can raise the priority of the QoS rule you selected by |
| clicking this button. |
Move Down | You can lower the priority of the QoS rule you selected by |
| clicking this button. |
|
|
3.3.5.1 Add a new QoS rule
After you click “Add” button on QoS page, the following message will appear:
58