¾ LAN IP section
Parameters | Default | Description |
IP address | 192.168.2.1 | This is the router’s LAN IP address (Your LAN clients’ |
|
| default gateway IP address). |
Subnet Mask | 255.255.255.0 | Specify a Subnet Mask for your LAN segment. |
802.1d Spanning Tree | Disable | If you wish to activate 802.1d spanning tree function, |
|
| select “Enabled”, or set it to “Disabled” |
|
| If 802.1d Spanning Tree function is enabled, this router |
|
| will use the spanning tree protocol to prevent from |
|
| network loop happened in the LAN ports. |
DHCP Server | Enable | By enablting the DHCP server, the router will |
|
| automatically give your LAN clients an IP address. If the |
|
| DHCP server is not enabled then you’ll have to manually |
|
| set your LAN client’s IP addresses; make sure the LAN |
|
| Client is in the same subnet as this broadband router if |
|
| you want the router to be your LAN client’s default |
|
| gateway. |
|
|
|
|
| 32 |