Airlink101 AR570W user manual Password, Service Name, Connection Type, Idle Time Out

Page 22

Password

Please input the password assigned by your Internet service

 

provider here.

DNS Address

Select the type of how you obtain IP address from your service

 

provider here. You can choose “Obtain an IP address

 

automatically”, or “Use the following IP address” (i.e. static IP

 

address).

Primary DNS

Please input the IP address of DNS server provided by your

 

service provider.

Secondary DNS

Please input the IP address of another DNS server provided by

 

your service provider, this is optional.

Service Name

Please give a name to this Internet service (this is optional).

MTU

Please input the MTU value of your network connection here. If

 

you don’t know, you can use default value.

Connection Type

Please select the connection type you wish to use. There are 3

 

options:

 

1) ‘Continuous’ - keep internet connection alive, do not

 

disconnect,

 

2) “Connect on Demand” - only connects to Internet when there’s

 

a connect attempt.

 

3) ‘Manual’ - only connects to Internet when ‘Connect’ button on

 

this page is pressed, and disconnects when ‘Disconnect button

 

is pressed.

Idle Time Out

Specify the time to shutdown internet connect after no internet

 

activity is detected by minute. This option is only available when

 

connection type is ‘Connect on Demand’.

 

 

Static IP

Click on Static IP if your ISP (Internet Service Provider) has provided you a set of IP addresses for your Internet connection.

Enter the IP address, Subnet Mask, DNS addresses and Default Gateway provided by your ISP. Note: You must use the addresses provided by your Internet service provider, wrong setting value will cause connection problem.

23

Image 22
Contents Wireless N 150 Router Federal Communication Commission Interference Statement Table of Contents Troubleshooting Technical Support Package Contents FeaturesRouter Interface Back Panel WPS Installing the Router Using EZ Setup WizardPage Page Dynamic IP Cable Modem users Page Page Congratulations! Your router configuration has been finished Connecting to the Router Wirelessly Page Using Web Configuration Utility Page Current Time Setup WizardEnable NTP Update Time ZoneHost Name Time Server AddressDaylight Savings MAC AddressSecondary DNS Primary DNSUser Name Connection Type PasswordService Name Idle Time OutPptp Pptp GatewayConnection ID BEZEQ-ISRAELL2TP Gateway User Name Please input user name assigned by TelstraParameterDescription Channel Number Associated ClientsWPA2Mixed Page 1 WAN Network2 LAN 802.1d Spanning Tree IP addressSubnet Mask Dhcp ServerDhcp Client Start IP Enable Static Dhcp LeasesLease Time Dhcp Client End IPNAT / Static Routing Reset Enable Static RoutingDefault Gateway Destination LAN IPDdns Reset You can also click ‘Reset’ button unselect allDynamic DNS Provider Password/KeyAccount Basic Settings WirelessBand Wireless Security Show Active ClientsEncryption Enable 802.1x AuthenticationSee 3.2.2.1 to 3.2.2.3 for each encryption type Key Format Default Tx KeyKey Length Encryption Key 1~4Pre-shared Key Format WPA Unicast Cipher SuitePre-shared Key Radius Server IP Address Radius Server PasswordMAC Control Radius Server PortComment Enable MAC ControlClear Advanced Settings Fragment ThresholdBeacon Interval Tx PowerRTS Threshold Dtim Period5 WPS Page Wi-Fi Protected Setup Information Enable WPSConfig Mode Configure by Push Button Configure by Pin CodeApplication & Gaming Virtual Server Port ForwardingPublic Port Special Applications Port TriggeringCurrent Virtual Server Table Popular Application Enable Special ApplicationsTCP/UDP Port to Open Add in red box3 DMZ Client PC IP address Enable DMZPublic IP Current DMZ TableALG Settings Reset You can also click ‘Reset’ button to unselect all5 QoS Total Upload Bandwidth Enable QoSTotal Download Bandwidth Current QoS TableLocal IP Address Rule NameBandwidth Local Port RangeProtocol 1 IP & Port Filtering Access RestrictionsEnable IP & Port Filtering Deny/AllowClient PC Description Client ServicePort Range MAC Filtering Client PC MAC Address Enable MAC Filtering3 URL/Keyword Filtering Current MAC Filtering TableURL/Keyword Enable URL FilteringCurrent URL Blocking Table Security FirewallDoS Denial-of-Service Ping of Death Pptp pass through VPN Pass throughIPsec pass through L2TP pass throughAdministration TimeConfirmed Password Current PasswordNew Password ManagementReset Reboot Remote Management Firmware Upgrade Restore Settings Configuration SettingsBackup Settings Restore to Factory DefaultSave 6 LogRefresh Statistics Internet Connection Status Wlan Wireless LAN StatusStatus LAN StatusSystem Status Troubleshooting Technical Support